|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
06-30-2017, 06:47 PM | #1 |
Not Yet Wild
Join Date: May 2017
Location: The Island
Posts: 42
|
EZ-Go WONT move
Guys,
I need your expert opinions on why my cart won't move. I have a DVM and have checked continuity everywhere that i know of, high voltage and low voltage. I have checked voltage everywhere that i know of, but still cannot figure out why the cart wont move. After the cart quit moving I installed an SW-182 F/R switch (which i already had plans to do), this didn't solve the problem. I changed out my solenoid because i was seeing same voltage as pack voltage when pressing the throttle (little did i know this was because of the resistor) not because i had a bad solenoid. The cart operated great for the first 2 months that i have had it, now it has been sitting for 1 month and i am about to take it to a shop (which i hate to do). Please help! |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
06-30-2017, 07:43 PM | #2 |
Getting Wild
Join Date: Jun 2017
Location: central Alabama
Posts: 85
|
Re: NEED Help! EZ-Go WONT move
oleblue, what is your total pack voltage? also how does each each individual battery test? best to check 12 hrs after charging.
|
06-30-2017, 07:48 PM | #3 |
Not Yet Wild
Join Date: May 2017
Location: The Island
Posts: 42
|
Re: NEED Help! EZ-Go WONT move
37.4 V is the total package. Each battery is between 6.1-6.4
|
06-30-2017, 08:51 PM | #4 |
Getting Wild
Join Date: Jun 2017
Location: central Alabama
Posts: 85
|
Re: EZ-Go WONT move
thought maybe you had a bad battery. have you read scottyb's sticky thread on ezgo diagnostics. it's really good. gives you the numbers you need to see.
|
06-30-2017, 09:07 PM | #5 |
Not Yet Wild
Join Date: May 2017
Location: The Island
Posts: 42
|
Re: EZ-Go WONT move
I have tried a few steps of it. I don't have a printer, so I will take my laptop out to the cart tomorrow and start working through wach step.
|
06-30-2017, 09:21 PM | #6 |
Getting Wild
Join Date: Jun 2017
Location: central Alabama
Posts: 85
|
Re: EZ-Go WONT move
wish I could help more. Im new to carts myself. I replaced my controller with an alltrax from scottyb and he was great. really knows his stuff. hope you get her going.
|
07-01-2017, 07:22 AM | #7 |
Not Yet Wild
Join Date: May 2017
Location: The Island
Posts: 42
|
Re: EZ-Go WONT move
I have just seemed to exhaust everything that I am aware of. I was hoping someone could suggest that I check something that I may have missed.
|
07-01-2017, 09:36 AM | #8 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,358
|
Re: EZ-Go WONT move
Check to see you have 36v positive (+) power to the key switch and coming out of the key switch
|
07-01-2017, 09:56 AM | #9 |
Not Yet Wild
Join Date: May 2017
Location: The Island
Posts: 42
|
Re: EZ-Go WONT move
ScottyB, 37.4 in and 37.4 out of the key switch.
|
07-01-2017, 10:05 AM | #10 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,358
|
Re: EZ-Go WONT move
Check to see why the solenoid does not have 36v on the solenoid between the 2 small posts when you try go. Hint there is a switch in the pedal box for the (+) side. The controller provides the (-)
Determine which is missing = or - on the solenoid's small posts when you press the gas - I hope this helps.Have a great holiday |
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
48v ds sometimes wont move | Electric Club Car | |||
Old EZ - GO WONT MOVE | Electric EZGO | |||
Ezgo dcs solenoid clicks but wont disengage and wont move | Electric EZGO | |||
EZ Go wont move | Electric EZGO | |||
Car comes on but wont move | Electric Club Car |