lifted club cars - lifted ezgo
Home FAQDonate Who's Online
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric EZGO
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV.



Post New Thread  Reply
Thread Tools Display Modes
Unread 08-05-2017, 10:39 PM   #1
Not Yet Wild
 
Join Date: Aug 2017
Posts: 1
Question Solenoid not engaging with Forward / Reverse switch? (Solenoid is good)

I have a 93' Medalist that I just picked up. Put 6 brand new batteries in it.

Heres where I'm getting lost and would appreciated any troubleshooting tips!

When I put the cart in forward / reverse nothing happens. Reverse bell rings so I know I have power. Key switch also works. Batteries are hooked up correctly and outputting around 37 volts. The solenoid never 'engages' when I go from neutral to forward or reverse......However - If I jump the terminals on the solenoid it properly engages and then I have full control! Reverse and Forward! Throttle works properly then as well also (slow, fast etc.)

This leads me to believe there is something going on between the forward / reverse switch leading up to the solenoid. Does anybody have any tips on common things that can out between those two parts? I even removed all connections, cleaned with wire brush and WD-40.

I know a little but not allot! Thanks!
pstrode is offline   Reply With Quote
Alt Today
BGW

Golf car forum Sponsored Links

__________________
This advertising will not be shown in this way to registered members.
Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum
   
Unread 08-05-2017, 11:50 PM   #2
Gone Mad
E-Z-GO
 
Join Date: Oct 2009
Location: Buford, GA
Posts: 8,988
Default Re: Solenoid not engaging with Forward / Reverse switch? (Solenoid is good)

Welcome. Go to the Stickies and download the Owners, Parts, and Service manuals. Download the wiring diagram. I'm assuming you have a handheld digital multimeter (DMM). If so, study the wiring diagram and clip one lead of your DMM on pack negative, and follow the voltage from the battery, to the reed switch (interlock), through all switches and wire spade connectors, until you lose pack voltage.

You need to place the cart on jack stands, and press the throttle to get MS-3 to close.
yurtle is offline   Reply With Quote
Reply

Tags
solenoid
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric EZGO


Thread Tools
Display Modes


Similar Threads
Thread Forum
Solenoid clicks, wont move forward or reverse Electric EZGO
how to tell if your forward reverse switch is good Electric EZGO
I got reverse but only solenoid click in forward?? Electric EZGO
Solenoid not engaging; Potentiometer? Electric Club Car
EZGO Freedom hesitates when switching into forward or reverse....solenoid? Electric EZGO


All times are GMT -5. The time now is 09:13 AM.


Club Car Electric | EZGO Electric | Lifted Golf Carts | Gas EZGO | Used Golf Carts and Parts

Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2019, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.