![]() |
|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
![]() ![]() |
Thread Tools | Display Modes |
![]() | #11 | |
Not Yet Wild ![]() Join Date: Aug 2017 Location: Sedona
Posts: 59
| ![]() Quote:
| |
![]() | ![]() |
![]() | |
![]() __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum | |
![]() | #12 |
go to cartsunlimited.net ![]() ![]() Join Date: Dec 2007 Location: Southern California
Posts: 68,728
| ![]() Any upgrade questions just email me at scottyb@cartsunlimited.net |
![]() | ![]() |
![]() | #13 | |
Not Yet Wild ![]() Join Date: Aug 2017 Location: Sedona
Posts: 59
| ![]() Quote:
| |
![]() | ![]() |
![]() | #14 |
Gone Wild ![]() Join Date: Nov 2014 Location: New Albany, Indiana
Posts: 479
| ![]() The 500 Alltrax is no bigger than the 400. It'll fit right where your existing controller is mounted. ![]() |
![]() | ![]() |
![]() | #15 |
go to cartsunlimited.net ![]() ![]() Join Date: Dec 2007 Location: Southern California
Posts: 68,728
| ![]() It fits. The environmental cover is not used. Toss it out. Alltrax offers a mounting system which is not needed either. The SR48500 and XCT48500 controllers bolt directly to the Ezgo heat sink in the original holes using 4 1/4-20 x 1.25 bolts. |
![]() | ![]() |
![]() | #16 |
Master of All Things ![]() ![]() Join Date: May 2013 Location: West Columbia, Texas
Posts: 11,538
| ![]() AZ....you have been ask a couple of times and have not responded as to which drive system you have....is it a Series Drive or a Sepex Drive? If you have a Series drive you should be looking at a SR48500 (newer type controller that looks like the sepex controller at the bottom ) or the older SPM48500 controller......and it will fit as I have one in my cart. Under the Seat.jpg if you have a Sepex drive, you would be looking at a XTC500 controller......and it will fit as well as I just built one for my nephew....actually because of the way its mounted it has MORE room. CODES.jpg |
![]() | ![]() |
![]() | #17 | |
Not Yet Wild ![]() Join Date: Aug 2017 Location: Sedona
Posts: 59
| ![]() Quote:
| |
![]() | ![]() |
![]() | #18 | |
Stay thirsty my friends! ![]() ![]() Join Date: Jan 2007 Location: Suburban Chicago
Posts: 25,560
| ![]() Quote:
| |
![]() | ![]() |
![]() | #19 |
go to cartsunlimited.net ![]() ![]() Join Date: Dec 2007 Location: Southern California
Posts: 68,728
| ![]() Agreed. see flow chart attached |
![]() | ![]() |
![]() | #20 |
Not Yet Wild ![]() Join Date: Aug 2017 Location: Sedona
Posts: 59
| ![]() Yes, those pictures are the ones.....Mine doesnt look like any of it.....Maybe if I take the cover off (where that hard cable attaches)that F/R switch will look like that.... But to lift up the seat and look.....Cant make heads or tails. Again, thanks for the help, and being so friendly! |
![]() | ![]() |
![]() |
|
Thread Tools | |
Display Modes | |
|
![]() | ||||
Thread | Forum | |||
what upgrades do I want/need | Electric EZGO | |||
G16 Upgrades ??? | Electric Yamaha | |||
G1 upgrades ???? | Gas Yamaha | |||
07 PDS upgrades | Electric EZGO | |||
CC upgrades | Electric Club Car |