EZ-GO 2008 need help with wiring

mrvan

Hello to everyone.

I have EZ-GO 2008, need help with wiring.

i will attach few pictures of my cart. I looked around internet, around this forum and found many explanations and many wiring diagrams but still unable to make cart run. I have buzzer sound when I put in reverse I have click of solenoid.

I dont have Controller Resistor and Electric Controller Resistor Mount Switch.

Help me to make this cart run please.

Attached Images

	20171008_181634.jpg (222.8 KB, 0 views)
	20171008_182239.jpg (216.1 KB, 0 views)
	20171008_182114.jpg (207.2 KB, 0 views)
	20171008_181840.jpg (219.8 KB, 0 views)

BGW

__________________
This advertising will not be shown in this way to registered members.
Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum

Cartmaster

BUMP

I don't think this is within my pay grade so wait for an expert to pop in.

P.S do you have a fire extinguisher?


Now waiting to be banned from the forum!

Raystar57

Before trying to "make" it run you need to fix every terminal in that wiring.
Those types of wrap around bare wire no terminal connections are just asking for trouble
and possible fire or battery explosion due to arcing and heat buildup.

mrvan

thank you for your answer. I know, I will do that but I need some wiring instructions, few things.
I have W , U , V , B+, B- on controller.
I have A1, A2, F1, F2 on motor. (and 3 pin sensor output)
I connected controller this way: B+ to solenoid (other side of solenoid to battery B+), B- to battery. I dont know correct wiring of controller to this motor. I need answer like: W to A1 , U to A2, V to F1 and where must go the F2 from motor.
can you tell me please if you know. I will be very grateful. Thank you very much.

JohnnieB

You have an AC controller (3 phase output) and a DC motor (Sepex type)

Basically, you have a 2008 RXV cart and trying to wire in a TXT-48V motor.

If you are lucky, it simply won't work. If your aren't, you will have a fire, or worse.

Raystar57

Please post some info on the controller make and model number if you can.
Need to understand what you have.

Thanks JohnnieB. The W, U and V were indicating AC controller but I was not sure.

mrvan

I knew that. :( because of that I cant find any wiring diagram of this motor with this controller. Thank you very much.
What I'm gonna do now? buy new motor or its better to buy new controller. to make this cart run. give me some adwise please. I will make new photos if needed.

mrvan

ok I will go and take a pics of everything I have. and Ill attach here. biggest thanks for everyone who taking time for help.

JohnnieB

Personally, I'd part it out and try to recover some of the original investment instead of throwing good money after bad.

The RXV doesn't have mechanical brakes, so if you get a controller that will run the motor you have, you won't have brakes. (You will have some regen braking, but not enough to completely stop the cart)

That appears to be a Danaher controller, which was soon replaced by a Curtis AC controller, so you might need a controller as well as a motor. Also looks like you would need a complete wiring harness and you mentioned some missing RXV parts.

mrvan

yes controller is danaher, and i miss:

E-Z-GO RXV Controller Resistor Assembly (Fits 2008-Up)
buggiesunlimitecom/golf-cart/e-z-go-rxv-controller-resistor-assembly-(fits-2008-up)/8322

E-Z-GO RXV Electric Controller Resistor Mount Switch (Fits 2008-Up)
buggiesunlimitedcom/golf-cart/e-z-go-rxv-electric-controller-resistor-mount-switch-(fits-2008-up)/8323

I think I miss only this. and motor which is for this controller and car will run and I will not have brakes.
I dont know what to do now, thinking. you opened my eyes. and I see not good wayouts.