|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
03-10-2009, 01:30 PM | #1 |
Not Yet Wild
Join Date: Feb 2009
Posts: 28
|
Charger Wiring Question
I am reconditioning a PowerWise 36V charger, mod 28115.I installed a new power input board and I have a question about the output DC connection. Bypassing the board, I get approx 43VDC out the transformer output, which I assume is okay.
The output ammeter was bypassed because of a blown fuse. My question is that there are two wires out of the transformer secondary which were spliced together when I got it, and they still are. I don't understand why are two wires, when one wire should have been sufficient, even after connecting the sensing voltage wire from the board. I don't have any wiring diagrams or the batteries yet to fully check it. I just want to make sure I get the output wiring correct before connecting to the batteries. Your help is appreciated. Maury |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
Powerdrive charger wiring | Electric Club Car | |||
36v to 48v charger question | Electric EZGO | |||
Charger Wiring Question | Electric golf carts | |||
Iso Wiring Diagram Ezgo Charger | Electric EZGO | |||
Textron golf cart charger wiring | Electric EZGO |