|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
12-04-2017, 11:03 AM | #1 |
Not Yet Wild
Join Date: Mar 2016
Posts: 35
|
Pro-bit programmer for BBB classic
Need Advice from someone with a Pro-bit programmer for a Navitas controller (SRE-DSE1000-48 ) in a '04 Bad Boy Buggy Classic.
Is there a feature or selection for resetting the controller for a "high voltage Limit"? Here's my problem, I'm pretty sure I messed up big time. I tried to move the cart while it was plugged in charging the battery pack. The cart started to move then shut down, now nothing! I've replaced both the contactors, new key switch, checked everything else I can think of. Any suggestions? I'm trying to figure this thing out before bringing it to the nearest shop which is over an hour and a half away. |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
12-05-2017, 04:28 PM | #2 |
Gone Wild
Join Date: Aug 2014
Location: fletcher,nc
Posts: 601
|
Re: Pro-bit programmer for BBB classic
does it have a blade switch in the charge receptacle? on the old ezgo`s it would stop the cart from moving...easily eliminated...
|
12-07-2017, 01:26 PM | #3 |
Not Yet Wild
Join Date: Mar 2016
Posts: 35
|
Re: Pro-bit programmer for BBB classic
There's no blade switch, fuse, or diode on or in the charge receptical. Thanks!
|
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
Which programmer for rxv 48v | Electric EZGO | |||
Need Danaher Programmer!!! | Electric EZGO | |||
Wtb curtis programmer | Golf Carts and Parts | |||
CC programmer for sale | Golf Carts and Parts | |||
Programmer | Tomberlin |