rxv leaf spring play?

addictj

replaced all the bushings for the leaf spring and the front bushings have a decent amount of play(side to side) dont seem right to me or am i wrong? old bushings are still in good shape and they have the same play also. anyone help?

BGW

__________________
This advertising will not be shown in this way to registered members.
Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum

addictj

anyone?

BobBoyce

You already covered this in your other thread.

http://www.buggiesgonewild.com/elect...light=bushings

As explained, there is slop caused by design changes. The original bushing design was for SAE hardware and metric hardware was used. You must use the bronze bushings mentioned in the other thread, then ream the insides with a drill bit to fit the SAE bolts. You will not resolve the play using new factory parts. I used Grade 8 bolts and nuts there.

addictj

This is for the leaf springs

BobBoyce

Same problem applies... The bushings were designed for SAE bolts and E-Z-GO uses metric bolts and tubes. A lot easier to get at to fix.