|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
03-17-2018, 05:00 AM | #1 |
Not Yet Wild
Join Date: Mar 2018
Posts: 2
|
2013 EZGO RXV seat/rear roof bracket
Hi, I have a 13 RXV and have found that the rear roof and seat support brackets that mount to the frame with 3 bolts on each side are missing some bolts due to the nut that is inside the frame from the factory breaking loose. There is no way to replace the nut without having to drill through the opposite side of frame or top of frame and I am worried about weakening the frame by doing that. Will I jeopardize the frame strength by drilling through the frame ? The hole would need to be about 5/8" . Any input or suggestions is appreciated. Thanks
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
03-17-2018, 08:20 AM | #2 | |
Gone Insane
Join Date: Oct 2015
Location: TN/NC/GA Tri-state area
Posts: 3,952
|
Re: 2013 EZGO RXV seat/rear roof bracket
Quote:
|
|
|
|
Similar Threads | ||||
Thread | Forum | |||
Custom rear seat & seat lean back bracket ideas needed. | Design Center | |||
WTB Yamaha G16 rear seat bracket | Golf Carts and Parts | |||
Rear roof support bracket TXT | Electric EZGO | |||
Medalist Rear Seat Bracket | Electric EZGO | |||
TXT rear seat and roof support bracket | Electric EZGO |