|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
04-11-2018, 04:49 PM | #1 |
Not Yet Wild
Join Date: Aug 2013
Posts: 10
|
06 series cart clicks but won’t move.
So recently my cart was acting up it would run fine and then just quit. It would sit for a while and then it would run again fine. I was going through cleaning all of the connections and found a loose connection on a motor post. After cleaning and tightening all connections the cart ran fine for a few weeks. Well the other day while playing golf it died and before even coming to a complete stop it took a off again. This happened a few times on the way home but I got home tightened all connections seemed like the motor post was a little loose again and went for a ride it ran fine. The next time I took it out I stopped and when trying to leave it wouldn’t go. The solenoid will click but it won’t move. I swapped motors thinking maybe the motor was the issue still no movement. Any ideas? Thanks
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
04-11-2018, 08:20 PM | #2 |
Gone Wild
Join Date: Apr 2013
Location: Deep Run, NC
Posts: 2,544
|
Re: 06 series cart clicks but won’t move.
Sounds like it could be the common 4 pin Molex connector that is located in the wire that runs from the throttle to the controller. It will either be located near the controller inside the controller cover, or I have seen them under the cart. Unplug and check for corrosion.
Sent from my SM-G930R4 using Tapatalk |
|
|
Similar Threads | ||||
Thread | Forum | |||
Cart clicks but will not move | Electric EZGO | |||
Solenoid clicks then clicks cart doesn't move | Electric EZGO | |||
48v ez-go golf cart clicks but doesn't move | Electric EZGO | |||
Solenoid clicks but cart will not move (sometimes) | Electric EZGO | |||
Cart clicks but want move... | Electric EZGO |