|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
04-19-2018, 10:57 PM | #1 |
Not Yet Wild
Join Date: Aug 2016
Posts: 6
|
Initial jerk in forward
I have 1989 Ezgo, Marathon I believe. Just had a heavy duty fnr switch installed to replace faulty old switch. Also upgraded guage of wire. Cart worked great for a couple weeks, but now is not initially working properly in forward. I can push accelerator, and nothing, sounds like solenoid is engaging. I push several more times, then the connection is made and it will jerk hard forward. After that it works fine. I can stop, turn off, go to reverse then back to forward and works fine. If it sits a while, it will do it again. Reverse works with no issue, even when forward is acting up.
Thoughts? Thanks! |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
04-21-2018, 02:15 AM | #2 |
Gone Wild
Join Date: Aug 2014
Location: Duncan Corners
Posts: 905
|
Re: Initial jerk in forward
Check f&r. Switch
You did not mention lift or large tires but I am guessing. All controller and other functions are the same in forward and reverse EXCEPT The f&r switch. Be sure to post fixed messages. |
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
G8 gots the jerk, jerk.... | Gas Yamaha | |||
'97 G16E Jerk Start Forward and Reverse | Electric Yamaha | |||
DCS Jerk F/R with Beeping | Electric EZGO | |||
Club car starts with a jerk | Electric Club Car |