|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
05-29-2018, 12:34 PM | #1 |
Not Yet Wild
Join Date: May 2018
Posts: 3
|
Battery charging contact issue
I have an issue with charging my EZGO cart. It's an older cart, probably from the 90s (I'm not sure of the exact date). When I push the charger plug into the cart receptacle it will charge, but when I let go it stops. I think I need to replace the receptacle in the cart and maybe the plug on the charger end as well (see attached pictures).
Is this difficult to do myself? What parts do I need to buy, is it possible just to get the receptacle and plug and replace them? Thanks in advance. |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
05-29-2018, 12:58 PM | #2 |
Guest
Posts: n/a
|
Re: Battery charging contact issue
|
05-29-2018, 01:31 PM | #3 |
Not Yet Wild
Join Date: May 2018
Posts: 3
|
Re: Battery charging contact issue
Thanks. It is easy to replace?
|
05-29-2018, 03:58 PM | #4 |
Guest
Posts: n/a
|
Re: Battery charging contact issue
for me or you ?
me it's ez but i don't know your skill level let me know what yu know about your cart and dc wiring please show more of your cart and charger |
05-30-2018, 12:31 PM | #5 |
Not Yet Wild
Join Date: May 2018
Posts: 3
|
Re: Battery charging contact issue
Well, I honestly don't know too much about it. But I was thinking of just opening it up, if it's just a case of removing some wiring and replacing with the new ones, I think I could do it.
Also, I noticed one of the parts you posted comes in 6 gauge and 10-12 gauge versions. Which do I need? I have a 1994 Ezgo Medalist 36v Thanks for all your help! |
05-30-2018, 03:34 PM | #6 |
Guest
Posts: n/a
|
Re: Battery charging contact issue
6 gauge cable would go on the cart side RECEPTACLE to the batteries (pre wired)
10-12 gauge repair kit goes into charger (new wire connectors need to be solder) there is pre wired handle if you don't solder good ... you would have to open charger https://www.cartszone.com/3412 i have the diagrams if you need them |
|
|
Similar Threads | ||||
Thread | Forum | |||
Battery Charging Issue | Electric Club Car | |||
Battery Charging Issue? | Electric Club Car | |||
Battery charging issue | Electric EZGO | |||
Charging Issue/ Battery Issue? | Electric EZGO | |||
Another battery charging issue | Electric Club Car |