|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
05-30-2018, 06:11 PM | #1 |
Not Yet Wild
Join Date: Sep 2012
Posts: 24
|
92 ezgo marathon
Cart stopped moving it’s 36 volt, if I played with they key switch and f/r switch sometimes it would click in and go, but now that won’t work. I believe the micro switch that sends power to the solenoid is bad, if I put voltage to the solenoid from the battery pack the solenoid clicks in but cart still won’t move,any help would be greatly appreciated!
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
05-30-2018, 06:41 PM | #2 |
Guest
Posts: n/a
|
Re: 92 ezgo marathon
JACK UP CART AND PLACE ON JACK STANDS FOR ANY TESTING
you need to check all the wiring give each wire a pull and shake here is your wiring diagram look at key switch and micro switches it sounds like the problem is micros |
05-30-2018, 07:57 PM | #3 |
Not Yet Wild
Join Date: Sep 2012
Posts: 24
|
Re: 92 ezgo marathon
Thank you, I pulled the one off that opens when you press the peddle and tested it,does not open and close have one on order and I will post when I get it on and see what happens but I feel there is something else wrong
|
05-30-2018, 10:41 PM | #4 |
Guest
Posts: n/a
|
Re: 92 ezgo marathon
why do you feel that something else is wrong ??
|
05-31-2018, 03:48 AM | #5 |
Not Yet Wild
Join Date: Sep 2012
Posts: 24
|
Re: 92 ezgo marathon
When I jumpered the solenoid and it clicked in and I pushed on the pedal the wheels did not move, just has me thinking.
|
06-06-2018, 05:37 PM | #6 |
Not Yet Wild
Join Date: Sep 2012
Posts: 24
|
Re: 92 ezgo marathon
Put new micro switch on, found the micro switch on the forward side of f/r switch is also bad, put new one on and now I get 36volts to the new switch on the forward side, when I open that switch I only get 22 volts on the other side of it. Now the red wire that carries the voltage to the other micro switch that sends voltage to the solenoid also has 22 volts, but if I disconnect it from that limit switch I get 36 volts from the wire. Any ideas?? I know this is hard to follow if anyone would like to call me I can explain it better let me know and I’ll post number.
|
06-06-2018, 07:17 PM | #7 |
Guest
Posts: n/a
|
Re: 92 ezgo marathon
time to test that old motor
motor test WARNING you don't want to make a big spark anywhere near the battery. note : use 2 wrenches on motor studs to keep them from spinning |
06-06-2018, 08:13 PM | #8 |
Gone Insane
Join Date: Oct 2016
Location: Richmond, VA
Posts: 14,214
|
Re: 92 ezgo marathon
Crash are you sure this 92 is a resistor cart?
|
06-06-2018, 08:19 PM | #9 |
Guest
Posts: n/a
|
Re: 92 ezgo marathon
yes sir .... controller carts were 94 up
|
06-06-2018, 11:38 PM | #10 |
Gone Insane
Join Date: Oct 2016
Location: Richmond, VA
Posts: 14,214
|
Re: 92 ezgo marathon
|
|
|
Similar Threads | ||||
Thread | Forum | |||
08 ergo pds problem | Electric EZGO | |||
2cyl ergo | Gas EZGO | |||
Ergo 79 | Gas EZGO | |||
Ergo won't go | Electric EZGO |