Does the Admiral B2 motor have a 4 or 8 pole speed sensor?

JohnnieB · 07-27-2018, 06:16 PM

Quote:

Originally Posted by bubba4dad

Not sure if it helps but I took a snapshot of the controller and have atached it here.

The file with a .txt extension is gibberish when opened. For a snapshot (meaning Picture?) it ought to have a .jpg or .png, or .bmp, or jif, or .jpeg, or .jpe extension.

scottyb · 07-27-2018, 06:19 PM

The snapshot is in computer language.

In the throttle graph. put the pointer at the top right corner. Click and drag the right corner to the left to 90% mark.
click SET to save
90% travel will now be 100% throttle

bubba4dad · 07-27-2018, 06:23 PM

I will try that with the throttle Scotty. What about my other issues? look 3-4 posts up...lol

I did not reset mine to default.
When I finished the installation I took it for its break in drives. All three ml3 switch positions resulted in the same top speed of 28.4 mph. I questioned this and figured it might be due to the 8 pole setting. I have since switched it to 4 pole and it seems to be working correct on mode 1 or “normal” as it runs right at 3000 rpm and a speed of about 15 mph. Mode 2 increases the rpm to about 3500 or approximately 19 mph. Mode 3 actually goes up to about 4000 rpm or about 24 mph and then slows down to about 3500 rpm and a speed of about 19.
The field map loaded is RHMOT-B2-V4.
So I’m back to being confused again.
Still need help!

PuttPutt · 07-27-2018, 06:48 PM

Field map for mine is RHMOT-B2-V4

I will set to 4 pole.

bubba4dad · 07-27-2018, 06:55 PM

The throttle fix worked. Well, sort of. It will go to 100% then back to 90%. I did manage to pick up a few rpms though. Now it will settle in about 4200 rpms and about 24 mph. If I turn the Speed sensor off it will go about 26 mph. If I change it to 8 pole it goes about 28 mph.

I am at a complete loss. I know the issues are in the controller just dont know what they are.

HELP

Cartcrazy1986 · 11-16-2019, 02:39 PM

Bubba did you see much difference In performance during break in as opposed to after? I am breaking in admiral A2 with alltrax XCT 500. Can’t get it over 4700 RPM no matter what I set it at with laptop. Mine is set on 4pole. Turned it to 8 pole and it wouldn’t go over 2800 RPM. Thanks

07-27-2018, 06:19 PM	#12
scottyb go to cartsunlimited.net Join Date: Dec 2007 Location: Southern California Posts: 68,727	Re: Does the Admiral B2 motor have a 4 or 8 pole speed sensor? The snapshot is in computer language. In the throttle graph. put the pointer at the top right corner. Click and drag the right corner to the left to 90% mark. click SET to save 90% travel will now be 100% throttle

07-27-2018, 06:23 PM	#13
bubba4dad Not Yet Wild Join Date: May 2018 Location: Alvin, Texas Posts: 59	Re: Does the Admiral B2 motor have a 4 or 8 pole speed sensor? I will try that with the throttle Scotty. What about my other issues? look 3-4 posts up...lol I did not reset mine to default. When I finished the installation I took it for its break in drives. All three ml3 switch positions resulted in the same top speed of 28.4 mph. I questioned this and figured it might be due to the 8 pole setting. I have since switched it to 4 pole and it seems to be working correct on mode 1 or “normal” as it runs right at 3000 rpm and a speed of about 15 mph. Mode 2 increases the rpm to about 3500 or approximately 19 mph. Mode 3 actually goes up to about 4000 rpm or about 24 mph and then slows down to about 3500 rpm and a speed of about 19. The field map loaded is RHMOT-B2-V4. So I’m back to being confused again. Still need help!

07-27-2018, 06:48 PM	#14
PuttPutt Gone Wild Join Date: Jan 2012 Location: Chico, California Posts: 362	Re: Does the Admiral B2 motor have a 4 or 8 pole speed sensor? Field map for mine is RHMOT-B2-V4 I will set to 4 pole.

07-27-2018, 06:55 PM	#15
bubba4dad Not Yet Wild Join Date: May 2018 Location: Alvin, Texas Posts: 59	Re: Does the Admiral B2 motor have a 4 or 8 pole speed sensor? The throttle fix worked. Well, sort of. It will go to 100% then back to 90%. I did manage to pick up a few rpms though. Now it will settle in about 4200 rpms and about 24 mph. If I turn the Speed sensor off it will go about 26 mph. If I change it to 8 pole it goes about 28 mph. I am at a complete loss. I know the issues are in the controller just dont know what they are. HELP

11-16-2019, 02:39 PM	#16
Cartcrazy1986 Not Yet Wild Join Date: Dec 2018 Location: Gulf Shores, AL Posts: 17	Re: Does the Admiral B2 motor have a 4 or 8 pole speed sensor? Bubba did you see much difference In performance during break in as opposed to after? I am breaking in admiral A2 with alltrax XCT 500. Can’t get it over 4700 RPM no matter what I set it at with laptop. Mine is set on 4pole. Turned it to 8 pole and it wouldn’t go over 2800 RPM. Thanks

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Forum
Admiral B2 speed sensor wire splicing	Electric EZGO
Admiral B2 speed sensor wiring	Electric Club Car
Admiral B2 speed sensor	Electric EZGO
High speed Admiral motor	Electric Club Car
D&D motor speed sensor.	Electric Club Car