RXV Cart wont move no solenoid clicking.

Hegezac

I have a 48 volt 2005 ex go rxv that I went to pull into garage and it wouldn't do anything. The reverse buzzer comes on but it has no clicking in forward on reverse. The brake would not disengage I had to use the bypass to move the cart. I have it tore apart and have looked over everything but I am at a loss. We are leaving for beach in the morning and the cart was suppose to be going with us. It dont look like that's going to happen now.

BGW

__________________
This advertising will not be shown in this way to registered members.
Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum

jkredman

Can you be more specific?

When you said bypass, was it the run/tow switch?

Can you measure the voltage of your battery pack. It must be greater than 48 volts.


Sent from my iPad using Tapatalk

Hegezac

I had to use the plugs under the plastic cover to disengage the brake. The tow switch wouldn't do anything.

The pack voltage was showing 49 volts.

Kenny0322

After attempting to connect both Auxiliary Power Line and Primary Power Line it seems my cart has come to a hault comtinuing to remain completely still. I get no clicks via silanoid however I recently replaced the 36v solenoid due to a resistance failure from both +/- terminals. It seems i'm missing a step.