|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
08-06-2018, 11:32 AM | #1 |
Not Yet Wild
Join Date: Jul 2018
Posts: 17
|
2005 txt 48v shuttle Curtis 1264-5407 controller
Is there a way to take off the automatic braking on this controller.
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
08-06-2018, 11:44 AM | #2 |
Techno-Nerd
Join Date: Jun 2011
Location: West Virginia
Posts: 19,654
|
Re: 2005 txt 48v shuttle Curtis 1264-5407 controller
I don't know if the regen braking can be completely turned off, but it might be set to a lesser amount with a hand held programmer.
Ask your EZGO dealer if they have a programmer for a 1264 controller. |
08-06-2018, 08:17 PM | #3 |
Over This Interview Is...
Join Date: Jun 2012
Location: AZ
Posts: 17,449
|
Re: 2005 txt 48v shuttle Curtis 1264-5407 controller
The Regen is quite high on those. And I do believe it could be turned way down with a handheld programmer. Those carts were originally programmed to be slow, tame, and idiot-proof.
|
08-07-2018, 03:00 PM | #4 |
Gone Wild
Join Date: Apr 2015
Location: Pennsylvania
Posts: 378
|
Re: 2005 txt 48v shuttle Curtis 1264-5407 controller
A majority of 1264's settings are above OEM level, so available handsets cant adjust it. You could upgrade it to a 1268 masterdrive which has pretty much identical pinout and regen can be turned so low its practically off. Those settings are typically OEM or Dealer depending on the model.
|
08-08-2018, 01:03 AM | #5 |
Over This Interview Is...
Join Date: Jun 2012
Location: AZ
Posts: 17,449
|
Re: 2005 txt 48v shuttle Curtis 1264-5407 controller
I guess I always forget that the 3 programmers I regularly use are level 4 "-4401" type
|
08-08-2018, 08:50 PM | #6 |
Not Yet Wild
Join Date: Jul 2018
Posts: 17
|
Re: 2005 txt 48v shuttle Curtis 1264-5407 controller
Thank you for the replies would it be worth checking with the dealer to program?
|
08-08-2018, 10:23 PM | #7 |
Over This Interview Is...
Join Date: Jun 2012
Location: AZ
Posts: 17,449
|
Re: 2005 txt 48v shuttle Curtis 1264-5407 controller
Well, if you were at the dealership where I work, I would turn it down for you. Some places aren't into the programming stuff, or don't have high enough level programmer to do it so they just say "can't be done". We don't get our programmers from Ezgo, or they wouldn't be level 4.
|
08-08-2018, 10:50 PM | #8 |
Gone Insane
Join Date: Oct 2015
Location: TN/NC/GA Tri-state area
Posts: 3,952
|
Re: 2005 txt 48v shuttle Curtis 1264-5407 controller
|
06-30-2021, 04:42 PM | #9 |
Not Yet Wild
Join Date: Jun 2021
Location: Florida
Posts: 10
|
Re: 2005 txt 48v shuttle Curtis 1264-5407 controller
Id like to ask you a couple questions about the curtis 1264-5407. I understand its a hard to find controller. Do you recommend rebuilding it, or replacing it with a different controller and if so which one ? Any recommendations?
|
06-30-2021, 07:26 PM | #10 | |
Techno-Nerd
Join Date: Jun 2011
Location: West Virginia
Posts: 19,654
|
Re: 2005 txt 48v shuttle Curtis 1264-5407 controller
Quote:
It is user programmable via a USB-A to USB-B cable (aka printer cable) connected to a laptop or similar device. Programming software (Toolkit) is free and is downloadable on the Alltrax website. Also, by adding a module, it can be programmed for more than one different user and the different users can be selected by a switch. |
|
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
Curtis PMC SepEx 1264-5407 Status Light | Electric EZGO | |||
Speed Chip etc on a Curtis 1264 controller - EZGO Shuttle | Electric EZGO | |||
Curtis 1264 controller - new/never used | Golf Carts and Parts | |||
curtis 1264 controller question | Electric EZGO |