|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
08-12-2018, 11:47 AM | #1 |
Not Yet Wild
Join Date: Jul 2016
Location: New york
Posts: 28
|
Ezgo TXT 36 controller won’t power up
Hi guys so my cart has been sitting since I parked it in may. I went out yesterday to drive it and I turn the key the battery indicator comes on full charge but will not move or make any noise. So I take the seat off and the controller status light is not lit. So I have checked all connections for being tight and looking for a broken or chewed wire and nothing. I have not checked any connections for a volt reading yet as I am not sure where to start. I charged my cart over night and no change.My controller is a alltrax DCX600. My other problem is before I go ordering a new controller I’m a little confused. I believe my cart is a PDS but my connections on the controller look like a DCS connection according to the new alltrax controller pictures. It looks like the previous owner may have bought a harness to convert to a different controller? Which would be the best controller to buy if I need a new one? Thanks for any help guys!
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
08-12-2018, 01:58 PM | #2 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,419
|
Re: Ezgo TXT 36 controller won’t power up
All of the old DCX controllers used adapters for PDS. You won't use that adapter with the new XCT controller. The XCT500 meets and exceeds the peak and sustained DCX600 output.
|
08-12-2018, 02:22 PM | #3 |
Not Yet Wild
Join Date: Jul 2016
Location: New york
Posts: 28
|
Re: Ezgo TXT 36 controller won’t power up
Ok I bought the 400 amp super duty solenoid from you last year as mine was under sized. Do you think my controller is the issue here? How much is the updated controller from you?
|
08-12-2018, 04:57 PM | #4 |
Over This Interview Is...
Join Date: Jun 2012
Location: AZ
Posts: 17,449
|
Re: Ezgo TXT 36 controller won’t power up
Pin 6, pin 9, pin 10 have to have B+ to power up the led and allow operation. Getti g any solenoid click? DCX mini manual has a pinout
|
08-13-2018, 05:34 AM | #5 |
Not Yet Wild
Join Date: Jul 2016
Location: New york
Posts: 28
|
Re: Ezgo TXT 36 controller won’t power up
Ok I will check those pins as soon as I get a chance. And no no solenoid click.
|
|
|
Similar Threads | ||||
Thread | Forum | |||
New Controller, Same Stock Power? | Electric EZGO | |||
Controller power wiring. | Electric EZGO | |||
first power to new controller | Electric EZGO | |||
Ezgo dies under power then regains power | Electric EZGO | |||
have power on ezgo buggy no power light | Electric EZGO |