|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
08-24-2018, 02:30 PM | #1 |
Gone Wild
Join Date: Sep 2016
Location: Ludington Michigan
Posts: 168
|
2003 TXT PDS from 36V to 42V
I have a chance to get another battery this weekend to see what difference 42 volts is over 36. This is just a "trial" for a day as I don't have a charger but intend t have mine charged and do the other with a 6v charger.
My main question is I have an Alltrax XCT400PDS controller. Do I need to change anything I the programming before I do this? Anything else I need to do? Thanks |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
08-24-2018, 03:50 PM | #2 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,358
|
Re: 2003 TXT PDS from 36V to 42V
You should be okay for a test but -
If it has a 36v solenoid I would keep the solenoid coil on 36v if the system will permanently run on 42v. To do this run the solenoid small (-) wire to the 6th battery negative. |
08-24-2018, 03:54 PM | #3 |
Gone Wild
Join Date: Sep 2016
Location: Ludington Michigan
Posts: 168
|
Re: 2003 TXT PDS from 36V to 42V
I guess I don't know. It was a package I bought from you with the 200 amp solenoid. Don't know if they voltage specific or not.
|
08-25-2018, 10:27 AM | #4 |
Gone Wild
Join Date: Sep 2016
Location: Ludington Michigan
Posts: 168
|
Re: 2003 TXT PDS from 36V to 42V
How do I know if the solenoid is 36v or 48v? I didn't know if they were "both" like a controller or not.
|
08-25-2018, 11:18 AM | #5 |
Techno-Nerd
Join Date: Jun 2011
Location: West Virginia
Posts: 19,654
|
Re: 2003 TXT PDS from 36V to 42V
Coil voltage is usually printed on the solenoid's label.
The only solenoid I know of that works with 36V, 42V and 48V battery packs is the MZJ400. |
08-25-2018, 12:48 PM | #6 |
Gone Wild
Join Date: Sep 2016
Location: Ludington Michigan
Posts: 168
|
Re: 2003 TXT PDS from 36V to 42V
Thanks! I'm pretty sure that is what I got from ScottyB. I will check.
|
08-25-2018, 01:20 PM | #7 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,358
|
Re: 2003 TXT PDS from 36V to 42V
All of the black Sw180 200a solenoids are voltage specific. Better off to have a 48v solenoid run under voltage than a 36v run over voltage.
|
08-25-2018, 05:50 PM | #8 |
Gone Wild
Join Date: Sep 2016
Location: Ludington Michigan
Posts: 168
|
Re: 2003 TXT PDS from 36V to 42V
I checked an see I have a MJZ400 so I am good right?
Thanks for the replies! |
08-25-2018, 10:41 PM | #9 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,358
|
Re: 2003 TXT PDS from 36V to 42V
That's right 400MZJ 36/48 V
See how much time we could save |
08-26-2018, 05:14 AM | #10 |
Gone Wild
Join Date: Sep 2016
Location: Ludington Michigan
Posts: 168
|
Re: 2003 TXT PDS from 36V to 42V
Thank! Sorry for the redundancy. I am new to all of this and didn't to screw anything up.
|
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
New 2003 DS | Electric Club Car | |||
is this a 2003 or 2003.5 club car | Electric Club Car | |||
2003.0 or 2003.5 Club Car DS Lift ?'s | Lifted Golf Carts | |||
2003 g22 | Gas Yamaha | |||
looking at a 2003 yam for my mom | Electric Yamaha |