90’ Marathon F/R switch wiring

Procon

I have a 1990 that I just got and I’m rewiring. It is a series cart but my wiring diagram doesn’t show exactly what wires go to the micro switches. I have a heavy duty switch that Im putting on it that I didn’t use on another cart years ago that I believe I got from Scotty B so I don't have that diagram anymore. The switch has one micro switch on each side with a jumper wire between them and one wire going to what I think is the reverse buzzer that is mounted to it. The left micro switch has places to hook a wire on each side of it and the right switch has 1 place to hook a wire and the buzzer (if thats what it is) has a spot for 1 wire to hook to it. Sorry so long but wanted to be detailed.

BGW

__________________
This advertising will not be shown in this way to registered members.
Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum

scottyb

The switch you describe is set up for the TXT. For the marathon you will need to change out the center shaft which requires boring out the housing center hole and removing the micro switch (ms) jumper.

Procon

I have the f/r switch that came on it too. Maybe I should just use it. It has 2 micr switches too but no jumper wire. Each micro switch has a spot on each end to hook a wire up but what wires go to each switch?