|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
09-29-2018, 09:59 AM | #1 |
Gone Wild
Join Date: Aug 2016
Posts: 612
|
2016 48v PDS w/ 600 amp Navitas torque controller dead in water after body change out
This cart came in after a customer changed the body and had to swap the lights onto the new body and now it won’t budge. The cart is in like new shape and it was claimed that the whole swap over occurred with the run/tow switch in the tow position like you’re suppose to do. Now the cart isn’t running and I don’t have a lot of experience with these controllers...any clue as to where to start looking? I can provide pictures as needed
Sent from my iPhone using Tapatalk |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
09-29-2018, 10:05 AM | #2 |
Gone Wild
Join Date: Dec 2009
Location: Aiken, SC
Posts: 13,005
|
Re: 2016 48v PDS w/ 600 amp Navitas torque controller dead in water after body change
Activation circuit should be the same as a standard pds so I would start at the reed switch and start following the path.
|
09-29-2018, 10:07 AM | #3 |
Gone Wild
Join Date: Aug 2016
Posts: 612
|
Re: 2016 48v PDS w/ 600 amp Navitas torque controller dead in water after body change
Reed switch from the charging port?
Sent from my iPhone using Tapatalk |
09-29-2018, 10:12 AM | #4 |
Gone Wild
Join Date: Dec 2009
Location: Aiken, SC
Posts: 13,005
|
Re: 2016 48v PDS w/ 600 amp Navitas torque controller dead in water after body change
Yes. If the body was swapped that had to come off
|
09-29-2018, 10:14 AM | #5 |
Gone Wild
Join Date: Aug 2016
Posts: 612
|
Re: 2016 48v PDS w/ 600 amp Navitas torque controller dead in water after body change
Ok I’ll check that but in the meantime I’m noticing when it’s charging I’m getting a 1-3 flashing from the red light inside the controller and when the charger is unplugged it’s a solid green light. Is that normal?
Sent from my iPhone using Tapatalk |
09-29-2018, 10:27 AM | #6 |
Gone Wild
Join Date: Dec 2009
Location: Aiken, SC
Posts: 13,005
|
Re: 2016 48v PDS w/ 600 amp Navitas torque controller dead in water after body change
Could be an over voltage error but don’t know. You need to find the manual for that controller
|
09-29-2018, 10:29 AM | #7 |
Gone Wild
Join Date: Aug 2016
Posts: 612
|
2016 48v PDS w/ 600 amp Navitas torque controller dead in water after body change out
Your right i got to find one and I’m having a hard time. This is the madjax version of the controller too so it’s blue and not green
Sent from my iPhone using Tapatalk |
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
Navitas controller | Electric EZGO | |||
Navitas TSX 440A Controller, Harness for Club Car IQ-up and Dash-Mount OTF Controller | Golf Carts and Parts | |||
new navitas controller | Electric EZGO | |||
Madjax/Navitas torque controller update | Electric Club Car | |||
2016 EZ-GO express S4 is dead ! | Gas EZGO |