|
|
|||||||
| Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
  |
|
|
Thread Tools | Display Modes |
10-03-2018, 02:41 PM
|
#1 |
|
Not Yet Wild
Join Date: Jul 2018
Location: Ontario, Canada
Posts: 16
|
Allltrax xct 48400 issues
My new Allltrax controller keeps blinking low voltage ... One green and two red.
But my cart is reading 38.2v ... Any other reason for this? |
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
10-03-2018, 03:12 PM
|
#2 |
|
Techno-Nerd
 Join Date: Jun 2011
Location: West Virginia
Posts: 19,654
|
Re: Allltrax xct 48400 issues
What is the voltage on the XCT's B+ terminal when solenoid clicks?
What is the XCT's Under Voltage slider set for? |
|
|
|
|
10-03-2018, 05:00 PM
|
#3 |
|
Not Yet Wild
Join Date: Jul 2018
Location: Ontario, Canada
Posts: 16
|
Re: Allltrax xct 48400 issues
I just checked settings ... under voltage was set for 38 and over for 60v ... what should the settings be for a 36v system?
Sent from my SM-G935W8 using Tapatalk |
|
|
|
|
10-03-2018, 05:25 PM
|
#4 |
|
Techno-Nerd
Join Date: Jun 2011
Location: West Virginia
Posts: 19,654
|
Re: Allltrax xct 48400 issues
1.5VPC (Volts per cell) times the number of 2V cells in the battery pack.
A 36V battery pack consists of 18 x 2V cell, so set it for 27.0V That should solve the under voltage error issue. |
|
|
|
|
|
||||||
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| New xct 48400-1264 | Electric EZGO | |||
| Alltrax XCT 48400 | Electric EZGO | |||
| Xct 48400 alltrax programming issues | Electric Yamaha | |||
| SR-48400 less 'reactive' then the AXE? | Electric EZGO | |||
| Allltrax NPX 4834 | Electric EZGO | |||
Linear Mode
