|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
10-23-2018, 08:00 PM | #1 |
Not Yet Wild
Join Date: Oct 2018
Posts: 15
|
How to test solenoid on rxv
I know I have seen this somewhere on here before but can’t find it. I do not get a voltage drop across it when energized. It seems I saw somewhere that it should have a 3 volt drop or it or the resister is bad. Can’t remember. Also is there a way to make the brake release to move the cart if you are having issues?
Thank you for any help |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
10-23-2018, 08:08 PM | #2 |
Gone Wild
Join Date: Mar 2014
Location: NE Indiana & SW Florida
Posts: 3,238
|
Re: How to test solenoid on rxv
Look under the controller cover and it tells you what to do to release brake.
|
10-24-2018, 02:30 PM | #3 |
Over This Interview Is...
Join Date: Jun 2012
Location: AZ
Posts: 17,449
|
Re: How to test solenoid on rxv
Rxv has no precharge resistor, so the 3v drop idea is out the window. If you were to add a precharge resistor, the controller would likely fail startup test with a code similar to "contactor welded"
|
10-25-2018, 05:27 PM | #4 |
Not Yet Wild
Join Date: Oct 2018
Posts: 15
|
Re: How to test solenoid on rxv
Thank you. I guess I’m back to brake or some hard to find problem thank you for your time!
|
|
|
Similar Threads | ||||
Thread | Forum | |||
How do I test a solenoid | Electric EZGO | |||
g19 solenoid test | Electric Yamaha | |||
94 CC DS solenoid test | Electric Club Car | |||
test solenoid or controller | Electric EZGO | |||
Solenoid test?? | Garage and Workshop |