|
|
|||||||
| Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
  |
|
|
Thread Tools | Display Modes |
11-10-2018, 10:47 AM
|
#1 |
|
Not Yet Wild
Join Date: Feb 2016
Posts: 29
|
solenoid not working 36v pds
I am getting power on all wires that should have power
the blue wire on solenoid has ground if the f-r switch is in neutral but when I put it in forward or reverse it no longer has ground on blue wire Any help would b appreciated |
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
11-10-2018, 12:56 PM
|
#2 |
|
Happy Carting
 Join Date: Dec 2007
Location: Southern California
Posts: 73,410
|
Re: solenoid not working 36v pds
The controller supplies the (-) when the pedal is depressed. If it is not - disconnect the blue wire & make a new wire going from the blue wire post to the battery main negative.
If the cart runs as it should you have bypassed a failed function of the controller. You can continue to operate with the new (-) wire until you decide to replace the controller. |
|
|
|
|
|
||||||
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Yamaha g16 shorted at solenoid now not working | Electric Yamaha | |||
| Problem with new solenoid not working | Gas Yamaha | |||
| Wtb working solenoid set for old club car 36v | Golf Carts and Parts | |||
| solenoid not working | Electric Club Car | |||
| New Alltrax and Solenoid install: nothing working | Electric Club Car | |||
Linear Mode
