|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
01-08-2019, 06:56 PM | #1 |
Not Yet Wild
Join Date: Jan 2019
Location: Richmond, TX
Posts: 73
|
1994 EZGO TXT Project
Hey gang!
We have a hunting place out in the Texas Hill Country. My F250 Super Duty is huge and not often necessary to head out to the hunting blinds. I decided to go the electric cart route since they are quiet and there are a ton of mods one can t=do to make them decent hunting carts. I bought a 1994 EZGO TXT this morning and hauled it home. No batteries or charger. Evidently previous owner lent the batteries and charger out and got ripped off. It needs a total rebuild but has plenty of potential. I have been looking at multiple rebuild threads and figure I can do this since I'm pretty mechanical as well as experienced in electrical and electronics. My plans so far: 1. Complete disassemble, cataloguing all parts and fasteners. 2. Replace battery tray. 3. Repair any corroded frame areas. 4. Powder coat frame. 5. Plowman's posi. 6. 6" lift, 22" tires. Have not decided on long travel lift but cart will be off road a lot. 7. HD rear springs. 8. Disc brakes. 9. Scottyb's conversion package with upgrade to 48v. His wiring kit too. 10. Camo paint. 11. Rear seat. 12. Headlights, tail lights brake lights, turn signals. 13. LED light bars. Green ones for pig hunting. 14. Tube brush guard and winch. I will be asking questions but so far I have gleaned tons of information from the forums. This is a great place. My first questions are regarding batteries. I am assuming my TXT originally had 6 each 6 v batteries? When I convert to 48v can I go with 4 each 12v batteries or will I have to use 6 each 8v batteries? Also, I see that I have to drill out some rivets to get the body off? I found rivet kits available. Can I use my pop rivet tool for these rivets? As soon as I can post pics I will. Thanks in advance! |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
01-08-2019, 09:38 PM | #2 |
Gone Wild
Join Date: Sep 2018
Posts: 791
|
Re: 1994 EZGO TXT Project
#5 is going to be a problem. I just called Plowman's Carts today to see if their posi will fit in my 1995 Medalist, but it will only fit a 1998-2006. Also, use six 8 volt batteries, rather than four 12 volt's. I believe they have a much better AH rating. Good luck with your build and here are some things I did to my 1995 Medalist, might give you some ideas.
http://www.buggiesgonewild.com/lifte...formation.html |
01-08-2019, 09:56 PM | #3 |
Gone Wild
Join Date: Oct 2012
Location: Southwestern Pa.
Posts: 6,215
|
Re: 1994 EZGO TXT Project
I don't know if the Medalist have Dana rear ends like my 2000 EZ-GO Txt model. Someone more knowledgeable than me needs to chime in.
|
01-09-2019, 06:44 AM | #4 |
Master of All Things
Join Date: May 2013
Location: West Columbia, Texas
Posts: 17,995
|
Re: 1994 EZGO TXT Project
truetex....sounds like you have a PLAN and a good one.....The link below is the hunting buggie I built for my nephew last year. it has all the features you are doing except the posi and the winch. We are Texan's as well....live on the coast near Houston.....his lease is out on the hill country.
My First TOTAL Build.pdf to answer some of your questions: as 70oldschoolracer mentioned.....the way to go would be to go 6-8v batteries, for a number of reasons. the best reason is that 6-8v's have a better range than 4-12v's. as far as your pip-rivet tools, YES, the rivets are standard pop rivets, nothing special. IF you are bound and determined to have a posi, it could be expensive, but a solution would be to obtain a 1998-2006 rear end, have it modified and swap it into your cart. |
01-09-2019, 07:24 AM | #5 |
British born Nincompoop
Join Date: Feb 2007
Location: United Kingdom
Posts: 2,461
|
Re: 1994 EZGO TXT Project
Most of the rivets in the kits are soft metal and easily fitted with a normal rivet gun. there are a few stainless ones on the TXT that may break your gun or your wrist LOL, but are ok with an air powered gun. I think these are just for the seat clips. Try not to replace them with soft rivets as they will not last long.
Good luck with your project. |
01-09-2019, 09:24 AM | #6 | |
Not Yet Wild
Join Date: Jan 2019
Location: Richmond, TX
Posts: 73
|
Re: 1994 EZGO TXT Project
Quote:
|
|
01-09-2019, 01:23 PM | #7 | |
Gone Wild
Join Date: Jun 2018
Location: Independence, LA
Posts: 216
|
Re: 1994 EZGO TXT Project
Quote:
If you're going to completely take off all the plastic from the metal body order 3 of the TXT rivet kits. The ones around the dash matched up but the rest on the rear body I had to play a guessing game with matching them up, I ordered 2 kits. Also make sure you use the right style rivet in the right place. |
|
01-09-2019, 01:53 PM | #8 |
Gone Wild
Join Date: Sep 2018
Posts: 791
|
Re: 1994 EZGO TXT Project
Does anybody know what changed on the rear ends in 1998-2006 or why the posi units will not work on the earlier years?
|
01-09-2019, 11:16 PM | #9 | |
Gone Wild
Join Date: Sep 2016
Location: Northern California
Posts: 1,300
|
Re: 1994 EZGO TXT Project
Quote:
Somewhere on this forum there is a list of exactly which rivets are needed for a complete rebuild. I had the list when I did mine and cross checked it with the repair manual. Using that, I didn’t have a problem knowing what went where, but the kits don’t have every single rivet. I can’t remember now which ones were not included. Others here know the answer to that. I wanted to say that it was the dash rivets, but not sure. It sounds like bobbycason fixed that buy getting multiple kits. I sourced the others I needed from fastenal. I’d never riveted anything before, but after using the kit it was easy to figure out what size and type was needed to finish. I also bought the hf larger style rivet gun. I ended up wishing I had just bought their pneumatic one. The one I bought (blue handles) is too large to get into some spots, so I had to buy a smaller one too. Also, the big one can kinda “jump” when it snaps off the rivet and scratch the paint if you’re not careful. The small one couldn’t do the large ss rivets that hold the body on. The pneumatic will do all sizes you will need. |
|
01-10-2019, 07:46 AM | #10 |
Not Yet Wild
Join Date: Jul 2010
Posts: 30
|
Re: 1994 EZGO TXT Project
truetex..... looks like you will be building a cart similar to mine. I hunt Texas hill country just northwest of Llano. From my experience in the hill country you are going to need the long travel up front and upgrade to HD hubs in the rear this hills and rocks are rough. Also, since you need batteries and a charger you may want to look at going lithium. I am about to pull the trigger on lithium for my '96 TXT series cart this spring. Lot of good information on here how to do it.
|
|
|
Similar Threads | ||||
Thread | Forum | |||
1994 Ezgo Textron Freedom gas conversion project | Members Rides | |||
1994 Medalist winter project | Electric EZGO | |||
Looking at 1994 EZGO Medalist as a first project - things to watch out for? | Electric EZGO | |||
Need advice on a 1994 DS project cart | Electric Club Car | |||
1994 Ezgo | Electric EZGO |