|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
01-17-2019, 08:24 PM | #1 |
Not Yet Wild
Join Date: Dec 2018
Posts: 8
|
Requiring Curtis 1206 without A2
I’m completely rewiring my 36 volt txt series and I can’t remember how it goes. All the Curtis wire diagrams have an A2 pole and mine only has B+, B-, & M. I could really use just a picture of a cart with wires to and from the forward and reverse, controller and motor please. Also don’t know where the red wire from the battery charge port on the golf cart goes. I have the ezgo technical manual but it doesn’t really put it all together.
Sent from my iPhone using Tapatalk |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
01-17-2019, 08:25 PM | #2 |
Gone Mad
Join Date: Oct 2009
Location: Buford, GA
Posts: 8,988
|
Re: Requiring Curtis 1206 without A2
This "tells" you how to connect with no A2.
EDIT: A2 directly to C. |
01-17-2019, 08:32 PM | #3 |
Not Yet Wild
Join Date: Dec 2018
Posts: 8
|
Re: Requiring Curtis 1206 without A2
Wow. That’s great thank you.
Sent from my iPhone using Tapatalk |
01-17-2019, 08:34 PM | #4 |
Not Yet Wild
Join Date: Dec 2018
Posts: 8
|
Re: Requiring Curtis 1206 without A2
I see that’s an altrax. Will that work with Curtis 1206?
Sent from my iPhone using Tapatalk |
01-17-2019, 08:41 PM | #5 |
Gone Mad
Join Date: Oct 2009
Location: Buford, GA
Posts: 8,988
|
Re: Requiring Curtis 1206 without A2
Yes. The high amperage cables and labels are the same. All the wires and color are also the same, just controller pins 1 - 4 are different.
|
01-17-2019, 09:48 PM | #6 |
Gone Wild
Join Date: Sep 2018
Posts: 791
|
Re: Requiring Curtis 1206 without A2
Hope this helps
|
01-17-2019, 10:04 PM | #7 |
Gone Mad
Join Date: Oct 2009
Location: Buford, GA
Posts: 8,988
|
Re: Requiring Curtis 1206 without A2
Interesting. You found another difference. C and A are wired differently on the two. I'll quit posting mine, as it's BAD to mix and match. There are several ways to wire them, that are electrically identical, but mix and match, NO.
Hopefully he saw that there were only two terminals with no cables connected. |
01-18-2019, 08:20 AM | #8 | |
Gone Wild
Join Date: Sep 2018
Posts: 791
|
Re: Requiring Curtis 1206 without A2
Quote:
|
|
01-18-2019, 09:14 AM | #9 |
Gone Mad
Join Date: Oct 2009
Location: Buford, GA
Posts: 8,988
|
Re: Requiring Curtis 1206 without A2
But you pointed out something I never realized, so I'll never send Alltrax' out again. I looked at the others long enough to see how the cart worked outside the black box (blue now), but actually never noticed until this month that BOTH, the four controller pins, and the four cables go to different places. Equivalent electrically, but potentially disastrous if mixed with factory wiring diagrams.
|
01-18-2019, 11:27 AM | #10 | |
Gone Wild
Join Date: Jun 2018
Location: Independence, LA
Posts: 216
|
Re: Requiring Curtis 1206 without A2
Quote:
|
|
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
Curtis 1206 275 Amp vs 350 Amp | Electric EZGO | |||
Connector for Curtis 1206-03 ? | Electric EZGO | |||
How do I get inside a curtis 1206? | Electric EZGO | |||
Curtis 1206 Controller | Electric EZGO | |||
Curtis 1206 test ? | Electric EZGO |