I am preparing for another SouthEastern US programming trip soon

BobBoyce · 02-11-2019, 12:24 AM

Quote:

Originally Posted by cgtech

This message sent to you from under the ocean, 9 feet under... 35 under water is quite impressive indeed!

My newly updated Garmin GPS in the car was showing the same below sea level thing that day as I was driving around central FL. There may have been countermeasures put in place by Homeland that day.

kgsc · 02-11-2019, 03:51 PM

Quote:

Originally Posted by Rino1313

Ugh. Ok. My carts are in Augusta but heading down to FL on Tuesday.

If they were at a dealer in Augusta may not be a good idea doing it there. EZGo may not approve..

jkredman · 02-12-2019, 08:45 PM

Quote:

Originally Posted by BobBoyce

My newly updated Garmin GPS in the car was showing the same below sea level thing that day as I was driving around central FL. There may have been countermeasures put in place by Homeland that day.

I’m gonna blame it on the government still trying to recover from the shut down. Murphy’s law indicates that if it was shut down for 35 days, it will require a minimum of 70 days for them to start functioning normally again.

(If my memory serves me correctly that is the third corollary to Murphy’s law. All promises of delivery must be multiplied by 2.)

Sent from my iPad using Tapatalk

geoffarias · 02-15-2019, 08:49 AM

Bob is the man. Although my cart is still running the same speed as before, its setup to go faster with a cable swap. Bob is unbelievably knowledgeable and knows the science engineering and facts of what the carts can do safely without damaging your components. Manufacturers will also sandbag their statistics due to liability and it was good to break my TXT 48v down with Bob and find out exactly what she can do and whats she designed to do RPM and draw wise.

Has anyone had experience with a cable swap on a TXT? Results before and after?

kgsc · 02-15-2019, 12:06 PM

What cable?

BobBoyce · 02-15-2019, 04:28 PM

Battery cables, they were 6 guage.

egregbell · 02-19-2019, 06:32 AM

Hello Bob,

Do your trips ever include the Dallas/Fort Worth area? Increase the speed. 2019 RXV 3.0. Thank you.

Sent from my iPhone using Tapatalk

BobBoyce · 02-20-2019, 03:04 AM

Quote:

Originally Posted by egregbell

Hello Bob,

Do your trips ever include the Dallas/Fort Worth area? Increase the speed. 2019 RXV 3.0. Thank you.

The 2019 eLiTe has the new controller, so yes, I can reprogram it. I am trying to set up a schedule that would take me through TX on my way west. PM me your contact information.

egregbell · 02-20-2019, 10:50 AM

Thank you! I messaged you.

Sent from my iPhone using Tapatalk

Brabike · 02-22-2019, 07:39 PM

My L6 is on order! Hoping for delivery in Southeastern Wisconsin in early March. Should be a nice addition to current RXV. I will be on the lookout for your trip west.

02-15-2019, 08:49 AM	#44
geoffarias Not Yet Wild Join Date: Jan 2019 Location: South Florida Posts: 21	Re: I am preparing for another SouthEastern US programming trip soon Bob is the man. Although my cart is still running the same speed as before, its setup to go faster with a cable swap. Bob is unbelievably knowledgeable and knows the science engineering and facts of what the carts can do safely without damaging your components. Manufacturers will also sandbag their statistics due to liability and it was good to break my TXT 48v down with Bob and find out exactly what she can do and whats she designed to do RPM and draw wise. Has anyone had experience with a cable swap on a TXT? Results before and after?

02-15-2019, 12:06 PM	#45
kgsc Gone Wild Join Date: Dec 2009 Location: Aiken, SC Posts: 6,914	Re: I am preparing for another SouthEastern US programming trip soon What cable?

02-15-2019, 04:28 PM	#46
BobBoyce Gone Insane Join Date: Oct 2015 Location: TN/NC/GA Tri-state area Posts: 2,780	Re: I am preparing for another SouthEastern US programming trip soon Battery cables, they were 6 guage.

02-19-2019, 06:32 AM	#47
egregbell Not Yet Wild Join Date: Jun 2015 Posts: 31	Re: I am preparing for another SouthEastern US programming trip soon Hello Bob, Do your trips ever include the Dallas/Fort Worth area? Increase the speed. 2019 RXV 3.0. Thank you. Sent from my iPhone using Tapatalk
egregbell Not Yet Wild Join Date: Jun 2015 Posts: 31

02-20-2019, 10:50 AM	#49
egregbell Not Yet Wild Join Date: Jun 2015 Posts: 31	Re: I am preparing for another SouthEastern US programming trip soon Thank you! I messaged you. Sent from my iPhone using Tapatalk
egregbell Not Yet Wild Join Date: Jun 2015 Posts: 31

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum

02-22-2019, 07:39 PM	#50
Brabike Not Yet Wild Join Date: Jan 2019 Posts: 4	Re: I am preparing for another SouthEastern US programming trip soon My L6 is on order! Hoping for delivery in Southeastern Wisconsin in early March. Should be a nice addition to current RXV. I will be on the lookout for your trip west.
Brabike Not Yet Wild Join Date: Jan 2019 Posts: 4

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Forum
Preparing to start a G1 J10	Gas Yamaha
Preparing for the upgrade	Big Block Talk!
Preparing Vtwin for the elements off road	Big Block Talk!