lifted club cars - lifted ezgo
Home FAQDonate Who's Online
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric EZGO
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV.



Post New Thread  Reply
Thread Tools Display Modes
Unread 03-16-2019, 06:07 PM   #1
Not Yet Wild
 
Join Date: May 2014
Posts: 32
Default 99 ezgo quit

I have 99 ezgo. It is is series cart 36 v. Reversing contractor. 400a AXE controller
200a solenoid. Last Saturday night I drove it in a neighborhood parade and it ran fine. Put it away and charged the batteries. Went to drive it today and it just clicks but won’t move in either direction. The reversing contractor clicks and the selonoid clicks. The controller light comes on. The batteries are fully charged with 39.2v. They are 6 month old Trojans.

It was running fine and now won’t move
Ezgodan is offline   Reply With Quote
Alt Today
BGW

Golf car forum Sponsored Links

__________________
This advertising will not be shown in this way to registered members.
Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum
   
Unread 03-16-2019, 06:48 PM   #2
Gone Mad
E-Z-GO
 
Join Date: Oct 2009
Location: Buford, GA
Posts: 7,770
Default Re: 99 ezgo quit

Quote:
Originally Posted by Ezgodan View Post
I have 99 ezgo. It is is series cart 36 v. Reversing contractor. 400a AXE controller
200a solenoid. Last Saturday night I drove it in a neighborhood parade and it ran fine. Put it away and charged the batteries. Went to drive it today and it just clicks but won’t move in either direction. The reversing contractor clicks and the selonoid clicks. The controller light comes on. The batteries are fully charged with 39.2v. They are 6 month old Trojans.

It was running fine and now won’t move
Does the AXE flash an error code? Should flash 4 times if you have an ITS throttle, then solid green for "ready to go".

Do you have a reed switch? If so, bypass it, as it will eventually fail, but your AXE giving LED blinks says it's still "good".

Do you have the following Molex connector on the cable from your throttle box to the wiring harness? Usually located between controller/solenoid and the FNR. If so, eliminate, butt splice or solder then cover each of the four wires with a good quality heat shrink.

If you answer this fairly quickly, you may get feedback on the reversing contactor before the big weekend. Meanwhile, you can do the throttle test on the following link. NOTE: follow the one for AXE.

Ezgo throttle testing
Attached Images
File Type: jpeg Molex.jpeg (254.5 KB, 0 views)
yurtle is offline   Reply With Quote
Reply
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric EZGO


Thread Tools
Display Modes


Similar Threads
Thread Forum
98 ezgo txt with dcs will run for 1 second then quit Electric EZGO
99 EZGO just quit Electric EZGO
99 ezgo just quit Electric EZGO
1996 ezgo just quit Electric EZGO
EZGO quit Electric EZGO


All times are GMT -5. The time now is 03:51 PM.


Club Car Electric | EZGO Electric | Lifted Golf Carts | Gas EZGO | Used Golf Carts and Parts

Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2019, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.