lifted club cars - lifted ezgo
Home FAQDonate Who's Online
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric EZGO
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV.



Post New Thread  Reply
Thread Tools Display Modes
Unread 03-26-2019, 04:15 PM   #1
Not Yet Wild
 
Join Date: Nov 2018
Posts: 26
Default Alltrax axe 4845 controller

2001 txt 36 volt. When wire 4 is connected cart runs slow. When disconnected cart runs good. Is this normal?

Sent from my SM-T810 using Tapatalk
bobe2332 is offline   Reply With Quote
Alt Today
BGW

Golf car forum Sponsored Links

__________________
This advertising will not be shown in this way to registered members.
Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum
   
Unread 03-26-2019, 04:19 PM   #2
Gone Mad
E-Z-GO
 
Join Date: Oct 2009
Location: Buford, GA
Posts: 8,988
Default Re: Alltrax axe 4845 controller

Yes. It's 1/2 speed for reverse and the backup beeper. Normally they're connected to MS4 on the attached wiring diagram.

If you meant it always runs slow, forward and reverse, then MS4 could be bad. It's on the back of the FNR.
Attached Files
File Type: pdf Doc100-043-B_DWG-AXE-EZGO-Wire-Dia.pdf (174.3 KB, 0 views)
yurtle is offline   Reply With Quote
Unread 03-26-2019, 04:28 PM   #3
Not Yet Wild
 
Join Date: Nov 2018
Posts: 26
Default Re: Alltrax axe 4845 controller

Thanks. I'm not good with wiring diagrams. Should I keep it disconnected or how do I connect it the right way.

Sent from my SM-T810 using Tapatalk
bobe2332 is offline   Reply With Quote
Unread 03-26-2019, 04:49 PM   #4
Gone Mad
E-Z-GO
 
Join Date: Oct 2009
Location: Buford, GA
Posts: 8,988
Default Re: Alltrax axe 4845 controller

Do you know of anyone who can read a wiring diagram? It's really pretty simple. Microswitch MS4 and MS2 both share a jumper wire, usually red, which should be pack positive referencing pack negative. From there the backup signal or pack positive goes through MS4, which is supposed to be off unless the FNR is in reverse. Then the backup beeper should sound and pack positive goes to controller pin 4 for 1/2 speed. If MS4 is always closed - on - you can just leave it unplugged from controller pin 4 for now. There's nothing wrong with no 1/2 speed reverse, though no backup beeper is not the safest way to go. 1/2 speed reverse is to give you more precise control of the throttle.
yurtle is offline   Reply With Quote
Unread 03-26-2019, 04:58 PM   #5
Not Yet Wild
 
Join Date: Nov 2018
Posts: 26
Default Re: Alltrax axe 4845 controller

Thanks very much. Could it be that the small wires going to the f&r switch got put on the wrong spades. All three were off at one time and I thought that I replaced them on the right spades. They are not color coded. Some idiot painted everything black.

Sent from my SM-T810 using Tapatalk
bobe2332 is offline   Reply With Quote
Unread 03-26-2019, 05:01 PM   #6
Gone Mad
E-Z-GO
 
Join Date: Oct 2009
Location: Buford, GA
Posts: 8,988
Default Re: Alltrax axe 4845 controller

Post a few pics and I'll try and tell you what to connect. Take the cover off of the FNR so I can see the two microswitches.
yurtle is offline   Reply With Quote
Unread 03-26-2019, 05:03 PM   #7
Gone Mad
E-Z-GO
 
Join Date: Oct 2009
Location: Buford, GA
Posts: 8,988
Default Re: Alltrax axe 4845 controller

Use the paperclip to attach pics.
yurtle is offline   Reply With Quote
Unread 03-26-2019, 05:12 PM   #8
Not Yet Wild
 
Join Date: Nov 2018
Posts: 26
Default Re: Alltrax axe 4845 controller

Your the best!

Sent from my SM-T810 using Tapatalk
bobe2332 is offline   Reply With Quote
Unread 03-26-2019, 05:28 PM   #9
Gone Mad
E-Z-GO
 
Join Date: Oct 2009
Location: Buford, GA
Posts: 8,988
Default Re: Alltrax axe 4845 controller

My best guess. I labeled two wires. One should go to the key switch and the other goes to the controller and beeper. Can you tell which is which? Also, there is a spade connector that goes nowhere. Do you know what that is?

The two green wires with spade connectors and plugged in together go from MS2 to the throttle microswitch and is green on the wiring diagram I sent you.
Attached Images
File Type: jpg 4a447f4f8128cfabde2b08c65dbe6f36.jpg (142.1 KB, 0 views)
yurtle is offline   Reply With Quote
Unread 03-26-2019, 05:32 PM   #10
Gone Mad
E-Z-GO
 
Join Date: Oct 2009
Location: Buford, GA
Posts: 8,988
Default Re: Alltrax axe 4845 controller

Try and get a closeup on each of the two microswitches. I can't follow the wires, and the only two colors I can make out are green and black spray paint. Use highest resolution and use the paperclip to attach.

Click on the thumbnail I attached up top. That's using the paperclip.
yurtle is offline   Reply With Quote
Reply
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric EZGO


Thread Tools
Display Modes


Similar Threads
Thread Forum
alltrax controller Electric Club Car
Alltrax controller Electric Club Car
4845 ALTRAX 400 AXE Prog. Controller Golf Carts and Parts
Will AXE 4845 burn my stock motor? Electric EZGO
36v cc installed a alltrax 4845 - results Electric Club Car


All times are GMT -5. The time now is 07:53 PM.


Club Car Electric | EZGO Electric | Lifted Golf Carts | Gas EZGO | Used Golf Carts and Parts

Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2019, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.