Buggies Gone Wild Golf Cart Forum

Buggies Gone Wild Golf Cart Forum (http://www.buggiesgonewild.com/)
-   Electric EZGO (http://www.buggiesgonewild.com/electric-ezgo/)
-   -   Ezgo has reverse but no forward (http://www.buggiesgonewild.com/electric-ezgo/151758-ezgo-has-reverse-but-no-forward.html)

Slickrocker 04-11-2019 08:00 PM

Ezgo has reverse but no forward
 
I got a 94 ezgo txt series golf cart. I have just recently replaced the solenoid, new cables, new f/r switch and controller. Batteries are only a few months old and fully charged. I have reverse but only clicks the solenoid when in forward. I have doubled checked my wiring and made sure the contacts looked good on the new f/r switch...I also switched the 2 cables at 3 'o'clock and 9 o'clock and it then goes forward while switched in reverse, but nothing when switched to reverse but clicking. What am I missing!? Thanks!!

mgray70 04-15-2019 07:39 AM

Re: Ezgo has reverse but no forward
 
In a series cart, when this happens, it is almost always the forward and reverse switch, or the high current cables going to the switch.

Sent from my SM-G930R4 using Tapatalk

yurtle 04-15-2019 09:15 AM

Re: Ezgo has reverse but no forward
 
My vote is the bracket the FNR is mounted on needs adjustment. The bolt holes are slotted to allow adjustment. I'm guessing it's failing to go all the way to the forward stop.

Sir Nuke 04-15-2019 12:52 PM

Re: Ezgo has reverse but no forward
 
Quote:

Originally Posted by yurtle (Post 1605101)
My vote is the bracket the FNR is mounted on needs adjustment. The bolt holes are slotted to allow adjustment. I'm guessing it's failing to go all the way to the forward stop.

that's my vote as well....and the easiest thing to check and fix. :thumbup:

yurtle 04-15-2019 02:03 PM

Re: Ezgo has reverse but no forward
 
1 Attachment(s)
Here's a bad pic. When I did mine, I rotated the FNR to exactly Neutral, and slid it back and forth until the handle was exactly straight up.

Andy4639 04-15-2019 09:03 PM

Re: Ezgo has reverse but no forward
 
Sounds like to me you have the cam 180 out. It only goes in one way to work both directions but you can install it on the shaft any way you want.
By your own description sounds like it's out!
:help:

Slickrocker 04-20-2019 07:33 PM

Re: Ezgo has reverse but no forward
 
Thanks for the input guys, turns out it was actually a loose connection on one of the brush studs in the motor.


All times are GMT -5. The time now is 01:45 AM.

Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2019, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
This Website and forum is the property of Buggiesgonewild.com. No material may be taken or duplicated in part or full without prior written consent of the owners of buggiesgonewild.com. 2006-2017 Buggiesgonewild.com. All rights reserved.