|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
04-13-2009, 02:46 PM | #1 |
Not Yet Wild
Join Date: Mar 2009
Location: Crandall, TX
Posts: 20
|
Contiuity on accelerator micro
The accelerator micro had continuity on the normally closed side all the way through WOT. is this correct or should disconnect after it is released? Thanks
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
04-13-2009, 09:17 PM | #2 |
Gone Wild
Join Date: Jan 2009
Location: Texas Panhandle
Posts: 170
|
Re: Contiuity on accelerator micro
A normally open switch should be open until it is pressed,
|
04-13-2009, 09:21 PM | #3 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,406
|
Re: Contiuity on accelerator micro
Don't overthink it. A microswitch is like a light switch it only has on and off.... it should have a nice little audible click when operated by hand and it doesnot matter which side the power comes in or out on
|
04-13-2009, 09:24 PM | #4 |
Not Yet Wild
Join Date: Mar 2009
Location: Crandall, TX
Posts: 20
|
Re: Contiuity on accelerator micro
Thanks guys, that makes two out three micros that are shot. I'll keep digging. And thank you for your help. It is greatly appreciated!!
|
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
micro switches | Electric EZGO | |||
TXT ITS micro replacement... | Electric EZGO | |||
micro switches | Gas EZGO | |||
micro switch | Electric EZGO | |||
Micro switches | Gas Club Car |