lifted club cars - lifted ezgo
Home FAQDonate Who's Online
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric EZGO
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV.



Post New Thread  Reply
Thread Tools Display Modes
Unread 05-12-2019, 03:46 PM   #1
Not Yet Wild
 
Join Date: May 2019
Posts: 2
Default EZGO 36 volt series motor won't run

I just purchased a non running EZGO Marathon series # A2697 serial # 996054. Previous owner tried to fix and quit . He replaced a 1204-027 controller with a 1206 controller and left off the A2 wire as the wiring diagram shows. He also replaced the Forward / Reverse switch and left some wires off. I think I have ID's the wires going to F/R switch and ,motor. I tested the motor by putting jumper between S1 & A2 abd hooked to 12 volt battery and it ran.
I can get the relay to click but no run. All the diagrams find are for model with ITS pedal box I have the 0 to 5K resistor also there is a extra resistor unhooked that work when in reverse. Any one have the correct wiring for my model. Also the key switch is connected straight to + 36 volts.
mercuryman is offline   Reply With Quote
Alt Today
BGW

Golf car forum Sponsored Links

__________________
This advertising will not be shown in this way to registered members.
Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum
   
Unread 05-12-2019, 05:12 PM   #2
Techno-Nerd
 
JohnnieB's Avatar
E-Z-GO
 
Join Date: Jun 2011
Location: West Virginia
Posts: 15,945
Default Re: EZGO 36 volt series motor won't run

Here's a schematic for a Marathon controller cart with pot box throttle.

However, I've never heard of a Curtis 1206 (series drive) controller that will work with a pot-box (0-5k) throttle. EZGO introduced the 1206 in their series drive carts at the same time they introduced their ITS throttle system.

Drop an Alltrax S48400 controller in it and it'll work.
Attached Images
File Type: jpg Marathon - Controller Schematic.JPG (143.7 KB, 0 views)
JohnnieB is offline   Reply With Quote
Unread 05-12-2019, 06:11 PM   #3
Not Yet Wild
 
Join Date: May 2019
Posts: 2
Default Re: EZGO 36 volt series motor won't run

I was wrong I have Curtis 1204M 5302 looks brand new. Do I need to program this to work. I have the old Curtis 1204 hard to read may be 027
mercuryman is offline   Reply With Quote
Reply
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric EZGO


Thread Tools
Display Modes


Similar Threads
Thread Forum
WTS- 36 volt EZGO series motor Golf Carts and Parts
WTB- 36 Volt EZGO TXT Series Motor Golf Carts and Parts
36 Volt Series Motor for Club Car Golf Carts and Parts
36 volt GE series motor test Electric EZGO
FS: Club Car 48 volt series motor Golf Carts and Parts


All times are GMT -5. The time now is 10:25 PM.


Club Car Electric | EZGO Electric | Lifted Golf Carts | Gas EZGO | Used Golf Carts and Parts

Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2019, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.