|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
05-15-2019, 05:49 PM | #1 |
Not Yet Wild
Join Date: Jul 2014
Location: Prairie Grove Arkansas
Posts: 25
|
Solenoid activation circuit w/ Alltrax xct4000pds
I just replaced my Alltrax XCT controller because I lost reverse. Now with new controller, I have no forward or reverse ( I had forward for 24 hrs). Scotty B thought it might be a problem with the solenoid activation circuit. I am hoping for some diagnostic help.
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
05-15-2019, 06:04 PM | #2 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,417
|
Re: Solenoid activation circuit w/ Alltrax xct4000pds
Reference your operator manual page 16.
Power (+) comes into the XCT control circuit at C1 pin 4 and 5. Can you verify you have power at pin 4 and 5. Power (+) goes out to the F&R switch on pin 1. Verify power out on pin 1 With the F&R switch in reverse power should be coming in pin 2 With the F&R switch in forward power should be coming in pin 3 If all the above conditions are met; The key switch is out on pin 9 and in on 8 The foot-switch is power out on C4 pin 1 and in on pin 2 |
06-23-2019, 02:15 PM | #3 |
Not Yet Wild
Join Date: Jul 2014
Location: Prairie Grove Arkansas
Posts: 25
|
Re: Solenoid activation circuit w/ Alltrax xct4000pds
Weird, but maybe the act of probing reset some loose connections. After a couple weeks everything still works great now!
Thanks! |
|
|
Similar Threads | ||||
Thread | Forum | |||
trouble diagnosing solenoid activation circuit | Electric Club Car | |||
94 Medalist charger wiring /activation circuit | Electric EZGO | |||
Solenoid activation circuit | Electric EZGO | |||
Losing solenoid activation circut | Electric Club Car | |||
solenoid activation | Electric EZGO |