|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
06-12-2019, 08:45 PM | #1 |
Not Yet Wild
Join Date: Jun 2019
Posts: 2
|
No movement
I rebuilt built a 2002 ezgo txt. I used and alltrex 48500, heavy duty solenoid, electric forward and reverse with 38 volt 6x8 batteries. It ran fine for 6/7 days and today it quit running. Battery meter at 50.7. Any thoughts on trouble shooting.
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
06-12-2019, 10:48 PM | #2 |
Over This Interview Is...
Join Date: Jun 2012
Location: AZ
Posts: 17,449
|
Re: No movement
Yep, hook laptop up to it, and see what the controller says is wrong. The software is free, and the USB cable is the commonly used one for USB printers (type a to type b)
|
06-13-2019, 06:45 AM | #3 |
Gone Mad
Join Date: Oct 2009
Location: Buford, GA
Posts: 8,988
|
Re: No movement
Sounds like a series? If so, there is one thing that can become intermittent, and that's the four wire Molex connector between the throttle microswitch and ITS and the wiring harness. Quick check would be just unplug, spray contact cleaner then plug, unplug, plug a few times. If that fixes it, then cut the connector off and solder or butt splice, then cover with a water resistant heat shrink.
|
|
|
Similar Threads | ||||
Thread | Forum | |||
98 EZGO TXT no movement | Electric EZGO | |||
G29 Transmission Movement | Electric Yamaha | |||
04 TXT no movement | Electric EZGO | |||
Inproper movement? | Electric EZGO |