08 RXV sometimes wont go good voltage

MAD-DOG · 07-11-2019, 06:15 AM

Most of the time its fine but once in a while it wont move , toggling the key switch gets it to move , now the other day it just stopped , couldn't get it to move , tried a different key and it took off , by the way Brand new trojans in it voltage is great , Are the keys chipped ?is the key switch a common problem with these ?

Threeput · 07-11-2019, 04:45 PM

Had the same problem with my 2009 RXV that I just purchased...found I was moving the FNR switch too fast...now I put to N..wait ..hear the clunk then GENTLY put it to F...no problem as long as you push the pedal slowly
also I found I had a intermittent faulty pedal switch.which I had to replace..now all OK

cgtech · 07-11-2019, 07:48 PM

The keys are absolutely NOT chipped, any standard txt key would work just as well. And no, keyswitch failures are not common, I have seen probably one ever failed. I totally agree with the idea of "feet OFF the pedals, switch to N, wait for 'clunk', go to desired direction, then One foot on pedals". Usually, that error can be solved by just condensing that last part to "feet off pedals, turn key to desired direction, wait for 'clunk', then one foot on pedals". Rxv will error if either pedal is pressed at all when key is turned on (including the beloved floor mat pressing the pedal). Also, Rxv defaults to "we ain't doing nothing but stop" whenever both pedals are pressed at same time.

07-11-2019, 06:15 AM	#1
MAD-DOG Gone Wild Join Date: Sep 2009 Location: WI Posts: 157	08 RXV sometimes wont go good voltage Most of the time its fine but once in a while it wont move , toggling the key switch gets it to move , now the other day it just stopped , couldn't get it to move , tried a different key and it took off , by the way Brand new trojans in it voltage is great , Are the keys chipped ?is the key switch a common problem with these ?

07-11-2019, 04:45 PM	#2
Threeput Gone Wild Join Date: Jun 2016 Posts: 180	Re: 08 RXV sometimes wont go good voltage Had the same problem with my 2009 RXV that I just purchased...found I was moving the FNR switch too fast...now I put to N..wait ..hear the clunk then GENTLY put it to F...no problem as long as you push the pedal slowly also I found I had a intermittent faulty pedal switch.which I had to replace..now all OK
Threeput Gone Wild Join Date: Jun 2016 Posts: 180

07-11-2019, 07:48 PM	#3
cgtech Over This Interview Is... Join Date: Jun 2012 Location: AZ Posts: 17,449	Re: 08 RXV sometimes wont go good voltage The keys are absolutely NOT chipped, any standard txt key would work just as well. And no, keyswitch failures are not common, I have seen probably one ever failed. I totally agree with the idea of "feet OFF the pedals, switch to N, wait for 'clunk', go to desired direction, then One foot on pedals". Usually, that error can be solved by just condensing that last part to "feet off pedals, turn key to desired direction, wait for 'clunk', then one foot on pedals". Rxv will error if either pedal is pressed at all when key is turned on (including the beloved floor mat pressing the pedal). Also, Rxv defaults to "we ain't doing nothing but stop" whenever both pedals are pressed at same time.

Similar Threads
Thread	Forum
good voltage cart won't move	Electric Club Car
what is a good voltage in batteries	Electric EZGO
2003 36 v ezgo good batteries wont run	Electric EZGO
Shuddering CC DS with good voltage.	Electric Club Car
G-16 Runs Good, Wont Pull	Gas Yamaha

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum