lifted club cars - lifted ezgo
Home FAQDonate Who's Online
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric EZGO
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV.



Post New Thread  Reply
Thread Tools Display Modes
Unread 08-12-2019, 07:22 PM   #1
Not Yet Wild
E-Z-GO
 
Join Date: Jun 2019
Location: Maui
Posts: 41
Default 08 rxv Curtis controller conversion

Aloha I did a Curtis controller conversion on my 08 ezgo rxv n I follow the instructions how to do it but when I got it done r n f unlock the brake n my buzzer goes on on all 3 position can someone send me the right place please thank u
Dksm77 is offline   Reply With Quote
Alt Today
BGW

Golf car forum Sponsored Links

__________________
This advertising will not be shown in this way to registered members.
Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum
   
Unread 08-12-2019, 08:09 PM   #2
Getting Wild
 
Join Date: Feb 2016
Posts: 102
Default Re: 08 rxv Curtis controller conversion

Make sure you spliced into the correct wire with the white wire from the adapter harness. You have to splice into the light colored wire that goes to the motor brake. It can be white or gray but all of them I have seen are white. At least a couple of people on this forum have spliced into the wrong wire. There is more than one white wire in the harness so you have to trace it back to the motor brake.
rngilliland is offline   Reply With Quote
Unread 08-12-2019, 10:32 PM   #3
Not Yet Wild
E-Z-GO
 
Join Date: Jun 2019
Location: Maui
Posts: 41
Default Re: 08 rxv Curtis controller conversion

I did the 08 rxv danaher to Curtis conversion Documented
Dksm77 is offline   Reply With Quote
Unread 08-12-2019, 10:33 PM   #4
Not Yet Wild
E-Z-GO
 
Join Date: Jun 2019
Location: Maui
Posts: 41
Default Re: 08 rxv Curtis controller conversion

It’s on the form
Dksm77 is offline   Reply With Quote
Unread 08-13-2019, 12:18 PM   #5
Not Yet Wild
E-Z-GO
 
Join Date: Jun 2019
Location: Maui
Posts: 41
Default Re: 08 rxv Curtis controller conversion

Can anybody lead me to the right place please thank u
Dksm77 is offline   Reply With Quote
Unread 08-13-2019, 01:35 PM   #6
Gone Wild
E-Z-GO
 
Join Date: Mar 2014
Location: NE Indiana & SW Florida
Posts: 1,530
Default Re: 08 rxv Curtis controller conversion

There are a lot of things left out here.

Was your cart running before you did the conversion?
What model of Curtis controller did you use 1206AC-52??
What voltage of solenoid did you use?
usgicollector is online now   Reply With Quote
Unread 08-13-2019, 04:05 PM   #7
Not Yet Wild
E-Z-GO
 
Join Date: Jun 2019
Location: Maui
Posts: 41
Default Re: 08 rxv Curtis controller conversion

Looking for Bob Boyce he make it work n did the conversion on 08 rxv with the danaher harness n my cuz send mind n his controller to bob n he fix my controller I need somebody get me to bob
Dksm77 is offline   Reply With Quote
Unread 08-13-2019, 05:20 PM   #8
Gone Insane
E-Z-GO
 
Join Date: Oct 2015
Location: TN/NC/GA Tri-state area
Posts: 3,202
Default Re: 08 rxv Curtis controller conversion

Quote:
Originally Posted by Dksm77 View Post
Looking for Bob Boyce he make it work n did the conversion on 08 rxv with the danaher harness n my cuz send mind n his controller to bob n he fix my controller I need somebody get me to bob
I remember the controllers you speak of, there were 2 of them. One was in good condition, with few errors, and reprogramming went well. The other however had dried out silicon seals around every contact post on the controller. This allowed salt air to get into the controller. I told your cousin that controller had possible corrosion issues inside, as it had a large list of errors, not all of which could be cleared. The primary error that would not clear was related to the buzzer circuit, which had been cut. I believe your cousin said that the buzzer wires had been cut on both carts, and that he fixed his prior to powering it up. There is nothing that I can do to repair a controller damaged in that way other than bypassing the buzzer check during the power up self test, which I had to do. Your issue is due to a defective controller, caused by cut buzzer wires at some point, and possible corrosion internally. I can only work with what I was sent. I'm not a miracle worker that can revive the dead.
BobBoyce is offline   Reply With Quote
Unread 08-13-2019, 05:47 PM   #9
Not Yet Wild
E-Z-GO
 
Join Date: Jun 2019
Location: Maui
Posts: 41
Default Re: 08 rxv Curtis controller conversion

I did the conversion that showed on the documented that u did with the same cart u did on the form n all I got is on all reverse neutral and forward the buzzer go on n the brake unlock I donít know what I did wrong
Dksm77 is offline   Reply With Quote
Unread 08-13-2019, 06:13 PM   #10
Gone Insane
E-Z-GO
 
Join Date: Oct 2015
Location: TN/NC/GA Tri-state area
Posts: 3,202
Default Re: 08 rxv Curtis controller conversion

Quote:
Originally Posted by Dksm77 View Post
I did the conversion that showed on the documented that u did with the same cart u did on the form n all I got is on all reverse neutral and forward the buzzer go on n the brake unlock I donít know what I did wrong
You may not have done anything wrong. I don't know. I'm just telling you that the controller was already damaged when it was sent to me. Someone had cut the buzzer wire and operated it that way on the cart that controller came from. Where did you buy that controller from?

Bob
BobBoyce is offline   Reply With Quote
Reply
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric EZGO


Thread Tools
Display Modes


Similar Threads
Thread Forum
RXV Danaher to Curtis Conversion Electric EZGO
2008 EZGO RXV - Curtis Controller Conversion Electric EZGO
Rxv 2009 Danaher controller verse Curtis 1260ac 5201 conversion Electric EZGO
Curtis 1204-402 Controller Conversion Problems Electric Club Car
Interest in possible Curtis AC Conversion Electric golf carts


All times are GMT -5. The time now is 05:46 AM.


Club Car Electric | EZGO Electric | Lifted Golf Carts | Gas EZGO | Used Golf Carts and Parts

Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2019, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.