|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
08-12-2019, 07:22 PM | #1 |
Not Yet Wild
Join Date: Jun 2019
Location: Maui
Posts: 41
|
08 rxv Curtis controller conversion
Aloha I did a Curtis controller conversion on my 08 ezgo rxv n I follow the instructions how to do it but when I got it done r n f unlock the brake n my buzzer goes on on all 3 position can someone send me the right place please thank u
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
08-12-2019, 08:09 PM | #2 |
Gone Wild
Join Date: Feb 2016
Posts: 229
|
Re: 08 rxv Curtis controller conversion
Make sure you spliced into the correct wire with the white wire from the adapter harness. You have to splice into the light colored wire that goes to the motor brake. It can be white or gray but all of them I have seen are white. At least a couple of people on this forum have spliced into the wrong wire. There is more than one white wire in the harness so you have to trace it back to the motor brake.
|
08-12-2019, 10:32 PM | #3 |
Not Yet Wild
Join Date: Jun 2019
Location: Maui
Posts: 41
|
Re: 08 rxv Curtis controller conversion
I did the 08 rxv danaher to Curtis conversion Documented
|
08-12-2019, 10:33 PM | #4 |
Not Yet Wild
Join Date: Jun 2019
Location: Maui
Posts: 41
|
Re: 08 rxv Curtis controller conversion
It’s on the form
|
08-13-2019, 12:18 PM | #5 |
Not Yet Wild
Join Date: Jun 2019
Location: Maui
Posts: 41
|
Re: 08 rxv Curtis controller conversion
Can anybody lead me to the right place please thank u
|
08-13-2019, 01:35 PM | #6 |
Gone Wild
Join Date: Mar 2014
Location: NE Indiana & SW Florida
Posts: 3,238
|
Re: 08 rxv Curtis controller conversion
There are a lot of things left out here.
Was your cart running before you did the conversion? What model of Curtis controller did you use 1206AC-52?? What voltage of solenoid did you use? |
08-13-2019, 04:05 PM | #7 |
Not Yet Wild
Join Date: Jun 2019
Location: Maui
Posts: 41
|
Re: 08 rxv Curtis controller conversion
Looking for Bob Boyce he make it work n did the conversion on 08 rxv with the danaher harness n my cuz send mind n his controller to bob n he fix my controller I need somebody get me to bob
|
08-13-2019, 05:20 PM | #8 |
Gone Insane
Join Date: Oct 2015
Location: TN/NC/GA Tri-state area
Posts: 3,952
|
Re: 08 rxv Curtis controller conversion
I remember the controllers you speak of, there were 2 of them. One was in good condition, with few errors, and reprogramming went well. The other however had dried out silicon seals around every contact post on the controller. This allowed salt air to get into the controller. I told your cousin that controller had possible corrosion issues inside, as it had a large list of errors, not all of which could be cleared. The primary error that would not clear was related to the buzzer circuit, which had been cut. I believe your cousin said that the buzzer wires had been cut on both carts, and that he fixed his prior to powering it up. There is nothing that I can do to repair a controller damaged in that way other than bypassing the buzzer check during the power up self test, which I had to do. Your issue is due to a defective controller, caused by cut buzzer wires at some point, and possible corrosion internally. I can only work with what I was sent. I'm not a miracle worker that can revive the dead.
|
08-13-2019, 05:47 PM | #9 |
Not Yet Wild
Join Date: Jun 2019
Location: Maui
Posts: 41
|
Re: 08 rxv Curtis controller conversion
I did the conversion that showed on the documented that u did with the same cart u did on the form n all I got is on all reverse neutral and forward the buzzer go on n the brake unlock I don’t know what I did wrong
|
08-13-2019, 06:13 PM | #10 | |
Gone Insane
Join Date: Oct 2015
Location: TN/NC/GA Tri-state area
Posts: 3,952
|
Re: 08 rxv Curtis controller conversion
Quote:
Bob |
|
|
|
Similar Threads | ||||
Thread | Forum | |||
RXV Danaher to Curtis Conversion | Electric EZGO | |||
2008 EZGO RXV - Curtis Controller Conversion | Electric EZGO | |||
Rxv 2009 Danaher controller verse Curtis 1260ac 5201 conversion | Electric EZGO | |||
Curtis 1204-402 Controller Conversion Problems | Electric Club Car | |||
Interest in possible Curtis AC Conversion | Electric golf carts |