|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
08-13-2019, 06:20 AM | #1 |
Not Yet Wild
Join Date: Aug 2019
Posts: 6
|
94 ezgo fnr
Ok had the notion to change wires to 6 ga, so I did. The cart was working fine until I made the swap. I removed one wire at a time and replaced with 6 ga. The 6 ga wires are 2 years old and from a working 2001 txt I have and use for parts. After the change the cart will move in reverse but not forward. The solenoid does click and on one attempt the tires did move in reverse with the fnr in both positions. Will recheck wire locations today but other thoughts will be helpful because I dont think wire is the problem.
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
08-13-2019, 11:44 AM | #2 |
Not Yet Wild
Join Date: Aug 2019
Posts: 6
|
Re: 94 ezgo fnr
wire is 4 gauge not 6.
|
08-13-2019, 01:06 PM | #3 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,358
|
Re: 94 ezgo fnr
Check the cable routes against this diagram
|
08-14-2019, 09:41 AM | #4 |
Not Yet Wild
Join Date: Aug 2019
Posts: 6
|
Re: 94 ezgo fnr
Thanks Scottyb for the diagram. I found several cables on the wrong location. With the information I found on the web I assume A terminal on FNR is located on the bottom where it bolts to the cart. The manuf code for my cart is 17P94 which is a 1994??? Will give a try later today.
|
08-14-2019, 12:57 PM | #5 |
Not Yet Wild
Join Date: Aug 2019
Posts: 6
|
Re: 94 ezgo fnr
Everything is good!
thanks |