lifted club cars - lifted ezgo
Home FAQDonate Who's Online
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric EZGO
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV.



Post New Thread  Reply
Thread Tools Display Modes
Unread 11-08-2019, 12:02 PM   #11
Getting Wild
 
Join Date: Sep 2014
Location: Spring Hope NC
Posts: 109
Default Re: Fuse needed??

Quote:
Originally Posted by JohnnieB View Post
Alltrax recommends an ANN250 for use with 400A or smaller controllers and an ANN400 for 450A or larger.

BTW: An ANNxxx fuse is a "Very Fast Acting" fuse, but that is in fuse terms, and it can pass twice its rating for 10 seconds or so without burning open.
Yeah I am seeing "fasting acting" and "slow blow"...so the I guess the fast acting is fine....
tlfinn is offline   Reply With Quote
Alt Today
BGW

Golf car forum Sponsored Links

__________________
This advertising will not be shown in this way to registered members.
Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum
   
Unread 11-08-2019, 12:38 PM   #12
Techno-Nerd
 
JohnnieB's Avatar
E-Z-GO
 
Join Date: Jun 2011
Location: West Virginia
Posts: 15,967
Default Re: Fuse needed??

Quote:
Originally Posted by tlfinn View Post
Yeah I am seeing "fasting acting" and "slow blow"...so the I guess the fast acting is fine....
Fuses are fire protection devices rather than protecting electronic stuff. In fact, the electronics usually protect the fuse.

I exploded my stock PDS motor, creating a dead short which took out the DCX400A controller and the 250A fuse didn't blow. (The XCT controller is short circuit protected on its outputs.)

BTW: The ANN250 can be place at either end of the B+ cable or the B- cable, or it can be placed at either end of any of the cables connecting the batteries together.
JohnnieB is offline   Reply With Quote
Unread 11-08-2019, 02:05 PM   #13
Getting Wild
 
Join Date: Sep 2014
Location: Spring Hope NC
Posts: 109
Default Re: Fuse needed??

So I'm seeing that the ANL 250's are about half the cost of the ANN 250's....is there a big difference?
tlfinn is offline   Reply With Quote
Unread 11-08-2019, 09:22 PM   #14
Techno-Nerd
 
JohnnieB's Avatar
E-Z-GO
 
Join Date: Jun 2011
Location: West Virginia
Posts: 15,967
Default Re: Fuse needed??

It ought to work about the same.
JohnnieB is offline   Reply With Quote
Unread 11-13-2019, 06:10 PM   #15
Stay thirsty my friends!
 
gornoman's Avatar
Mixed Breed
 
Join Date: Jan 2007
Location: Suburban Chicago
Posts: 25,554
Default Re: Fuse needed??

Quote:
Originally Posted by gornoman View Post
250a will cover the 400a controller as the fuse is slow to blow.
Fixed it.
gornoman is offline   Reply With Quote
Reply
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric EZGO


Thread Tools
Display Modes


Similar Threads
Thread Forum
Should there be Only One Fuse or More Gas Club Car
What fuse needed for a 12v inverter? Electric Club Car
What is the Volatage of the 15 Amp Fuse? Is it a special fuse? Gas EZGO
3/8 amp Fuse ?? Electric Club Car
1999 Club Car Fuse Inline Fuse for Lights Electric Club Car


All times are GMT -5. The time now is 10:00 AM.


Club Car Electric | EZGO Electric | Lifted Golf Carts | Gas EZGO | Used Golf Carts and Parts

Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2019, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.