lifted club cars - lifted ezgo
Home FAQDonate Who's Online
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric EZGO
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV.



Post New Thread  Reply
Thread Tools Display Modes
Unread 11-08-2019, 04:53 PM   #1
Not Yet Wild
 
Join Date: Oct 2019
Posts: 7
Angry 2010 EZGO PDS Curtis 1268 Upgrade problems

Hey guys, I have been having some trouble with my Curtis 1268 500amp upgrade in my EZGO PDS. I got the controller for cheap and was able to find a wiring harness for it luckily. I initially had issues with the walkaway relay plug but Sergio help me out with the wiring of that and now everting is wired up and looks good, but I知 getting a low voltage error code 2,1 from the controller and now I literally don稚 know where to go. I have purchased the controller, harness, and 36v/500amp Relay and I知 almost into it as much as a new controller. Please help!
ZGoins91 is offline   Reply With Quote
Alt Today
BGW

Golf car forum Sponsored Links

__________________
This advertising will not be shown in this way to registered members.
Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum
   
Unread 11-08-2019, 08:55 PM   #2
Over This Interview Is...
 
cgtech's Avatar
Yamaha
 
Join Date: Jun 2012
Location: AZ
Posts: 14,116
Default Re: 2010 EZGO PDS Curtis 1268 Upgrade problems

The controller could be currently adjusted for 48v?
cgtech is online now   Reply With Quote
Unread 11-09-2019, 10:33 AM   #3
Not Yet Wild
 
Join Date: Oct 2019
Posts: 7
Default Re: 2010 EZGO PDS Curtis 1268 Upgrade problems

Whenever I spoke to FSIP and Curtis, they say the controller automatically detects 36v or 48v so I知 confused. My battery pack is showing 38.9v
ZGoins91 is offline   Reply With Quote
Unread 11-09-2019, 12:03 PM   #4
Gone Wild
 
kgsc's Avatar
E-Z-GO
 
Join Date: Dec 2009
Location: Aiken, SC
Posts: 7,353
Default Re: 2010 EZGO PDS Curtis 1268 Upgrade problems

It will detect it and work on either but there is a low voltage cutoff setting. That might be set for a 48 volt cart. You need a handheld at this point or build yourself a programming cable. And you said you were in the Cumming GA area? You are near the Master of Curtis controllers Mr Bob Boyce in Tn. Send a PM to usgicollector and see if he can put you in touch with Bob.
kgsc is offline   Reply With Quote
Unread 11-10-2019, 01:09 PM   #5
Not Yet Wild
 
Join Date: Oct 2019
Posts: 7
Default Re: 2010 EZGO PDS Curtis 1268 Upgrade problems

Thank you KGSC, you helped me when I was going through the relay issues as well. I appreciate it. Should have never tried to go the cheap route on this whole thing, but I can tell you it was on a 48v EZGO before mine so that most likely is the issue. Wish I had the money to go ahead and convert to 48v, but I知 not there yet. I値l reach out to see if I can get in touch with Bob and maybe make a separate post to see if anyone has a programmer in Atlanta.
ZGoins91 is offline   Reply With Quote
Reply
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric EZGO


Thread Tools
Display Modes


Similar Threads
Thread Forum
EZGO 36v PDS Curtis 1268 conversion question. Extreme DC!
Navitas or Curtis Controller Upgrade for 2010 EZGO RXV Electric EZGO
Curtis 1268-5411 in 2012 Ezgo Express S6 - Tired of getting passed by teenage girls. Electric golf carts
I2 Excel upgrade to Curtis 1268 Controller Problems Electric Club Car
Please help me identify the motor on my 2010 Tomberlin Emerge 48ss (Curtis 1268) Tomberlin


All times are GMT -5. The time now is 12:31 PM.


Club Car Electric | EZGO Electric | Lifted Golf Carts | Gas EZGO | Used Golf Carts and Parts

Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2019, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.