|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
11-10-2019, 06:48 PM | #1 |
Not Yet Wild
Join Date: Apr 2019
Location: Statesboro, Ga
Posts: 49
|
Alltrax install Foward and Reverse Backwards
Installed a SR48400on an 2008 Ezgo txt. Converted from 36 to 48 volts. The FnR switch works backwards, 100% speed reverse in the forward position with switch in reverse position forward speed at 50%. Searched the forums and found old solution of switching the blue and orange wires. The only ones I see are on the micro switches. Switching still gives forward in reverse but no reverse in forward. I have read the Alltrax diagram, all seems in order.
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
11-10-2019, 09:07 PM | #2 |
Gone Wild
Join Date: Sep 2016
Location: Northern California
Posts: 1,300
|
Re: Alltrax install Foward and Reverse Backwards
What else did you add to the cart besides the controller? New cables? New f/r?
The orange wire gets powered when that micro is activated by the cart being shifted to reverse. The voltage is supplied to the controller via that orange wire. The backwards in f , and vice versa, can be cured by swapping the cables at 3 and 9 on the f/r. |
11-11-2019, 06:29 AM | #3 |
Not Yet Wild
Join Date: Apr 2019
Location: Statesboro, Ga
Posts: 49
|
Re: Alltrax install Foward and Reverse Backwards
New motor and battery cables 4 ga. Did not change the F/R. The A2 originally was connected to the F/R switch and A1 to the M- but the controller instructions have them reversed. I installed according to the instructions.
|
11-11-2019, 06:43 AM | #4 |
Gone Wild
Join Date: Sep 2012
Location: Charlotte, NC
Posts: 9,329
|
Re: Alltrax install Foward and Reverse Backwards
The Alltrax instructions also show the S1 and S2 connections on the FNR reversed from your original diagram.
If you are following the Alltrax instructions you need to wire it exactly as they show. |
11-11-2019, 06:48 AM | #5 |
Not Yet Wild
Join Date: Apr 2019
Location: Statesboro, Ga
Posts: 49
|
Re: Alltrax install Foward and Reverse Backwards
I did follow the instructions
|
11-11-2019, 10:22 AM | #6 |
Not Yet Wild
Join Date: Apr 2019
Location: Statesboro, Ga
Posts: 49
|
Re: Alltrax install Foward and Reverse Backwards
Orangeman, I will make the change on S1 and S2 or 3 and 9 on the F@R switch. I most likely connected them backwards by reading the diagram the wrong way. The Alltrax diagram has them labeled as B and D. Thanks!
|
11-11-2019, 11:22 AM | #7 |
Gone Wild
Join Date: Sep 2016
Location: Northern California
Posts: 1,300
|
Re: Alltrax install Foward and Reverse Backwards
I’ve got a contactor, so I wasn’t looking at the diagram, but swapping 3 and 9 is the fix I always see suggested here by the experts. Sergio is one of the best on this board, so stick with him and I guarantee you’ll get it sorted out.
|
11-11-2019, 06:08 PM | #8 |
Not Yet Wild
Join Date: Apr 2019
Location: Statesboro, Ga
Posts: 49
|
Re: Alltrax install Foward and Reverse Backwards
That worked , looking at the alltrax wiring I read the F&R switch backwards
|
11-11-2019, 08:41 PM | #9 |
Gone Wild
Join Date: Sep 2016
Location: Northern California
Posts: 1,300
|
Re: Alltrax install Foward and Reverse Backwards
Good to hear and thanks for posting the resolution.
|
|
|
Similar Threads | ||||
Thread | Forum | |||
New Alltrax XCT Forward/Reverse backwards | Electric Club Car | |||
new controler install now (forward and reverse are backwards)need help | Electric Club Car | |||
96 TXT DCS with Alltrax, no go. 5 Red in REVERSE (shudder backwards in FWD) | Electric EZGO | |||
Foward in reverse and reverse in forward | Electric Club Car | |||
EZGO Foward/Reverse Backwards ! | Electric EZGO |