48v @ wot

DR1989 · 04-26-2009, 08:52 PM

would connecting two extra 6v batteries between terminal 4 on the speed board and terminal 4 on the resistor board (http://www.buggiesgonewild.com/elect...g-manuals.html) so they are only connected @ wot work?

help:

bhfear · 04-27-2009, 12:44 AM

just add the batteries to the pack, and upgrade the solenoid, leave the 36v motor, find a new battery charger, pedal to the floor or dont go at all, THIS IS ONLY WITH RESISTOR CARTS NOT WITH A CONTROLLER CART,

rusty1 · 04-27-2009, 04:46 AM

dr how do you plan to wire this were would the pos and neg wire go?

DR1989 · 04-27-2009, 10:07 AM

terminal 4 from speed board goes to neg batt terminal and pos connects to terminal 4 resister board and only connect them in at wot.

rusty1 · 04-27-2009, 02:25 PM

try it and let us know if it works trial and error is some time the only

scottyb · 04-27-2009, 02:43 PM

How are you gonna charge them?

DR1989 · 04-27-2009, 05:48 PM

Will post results in a couple of months when i get all new batts when i get out of college. Just was looking for ideas to keep it stock while adding 2 more 6v batts so it will still function on the factory setup you would have to use a second 12v charger. Dont think it would be possible to use a 48v charger the way im wiring it.

scottyb · 04-27-2009, 05:53 PM

There is a way to wire a 'booster' battery(s) into the sytem like you ask but then you need to have a second 12v charger and most people just find it easier to go ahead and find a 48v charger and buy six 8v batteries etc for 48v ......

rusty1 · 04-27-2009, 06:04 PM

ya scott i see your point but i like have a resister cart i use around the yard half throttle but also like to play a little 2 have you seen what he is talking about ?

scottyb · 04-27-2009, 06:09 PM

I saw the diagram but never did try it cause it just makes sense to go to a single charger and 48v all the time.

04-26-2009, 08:52 PM	#1
DR1989 Not Yet Wild Join Date: Feb 2009 Location: winnsboro sc Posts: 70	48v @ wot would connecting two extra 6v batteries between terminal 4 on the speed board and terminal 4 on the resistor board (http://www.buggiesgonewild.com/elect...g-manuals.html) so they are only connected @ wot work? help:

04-27-2009, 12:44 AM	#2
bhfear EZ-GO-N Join Date: Dec 2007 Location: Geneseo, IL Posts: 505	Re: 48v @ wot just add the batteries to the pack, and upgrade the solenoid, leave the 36v motor, find a new battery charger, pedal to the floor or dont go at all, THIS IS ONLY WITH RESISTOR CARTS NOT WITH A CONTROLLER CART,

04-27-2009, 04:46 AM	#3
rusty1 Gone Wild Join Date: Mar 2009 Location: cochran georgia Posts: 300	Re: 48v @ wot dr how do you plan to wire this were would the pos and neg wire go?

04-27-2009, 10:07 AM	#4
DR1989 Not Yet Wild Join Date: Feb 2009 Location: winnsboro sc Posts: 70	Re: 48v @ wot terminal 4 from speed board goes to neg batt terminal and pos connects to terminal 4 resister board and only connect them in at wot.

04-27-2009, 02:25 PM	#5
rusty1 Gone Wild Join Date: Mar 2009 Location: cochran georgia Posts: 300	Re: 48v @ wot try it and let us know if it works trial and error is some time the only

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum

04-27-2009, 02:43 PM	#6
scottyb Happy Carting Join Date: Dec 2007 Location: Southern California Posts: 73,419	Re: 48v @ wot How are you gonna charge them?

04-27-2009, 05:48 PM	#7
DR1989 Not Yet Wild Join Date: Feb 2009 Location: winnsboro sc Posts: 70	Re: 48v @ wot Will post results in a couple of months when i get all new batts when i get out of college. Just was looking for ideas to keep it stock while adding 2 more 6v batts so it will still function on the factory setup you would have to use a second 12v charger. Dont think it would be possible to use a 48v charger the way im wiring it.

04-27-2009, 05:53 PM	#8
scottyb Happy Carting Join Date: Dec 2007 Location: Southern California Posts: 73,419	Re: 48v @ wot There is a way to wire a 'booster' battery(s) into the sytem like you ask but then you need to have a second 12v charger and most people just find it easier to go ahead and find a 48v charger and buy six 8v batteries etc for 48v ......

04-27-2009, 06:04 PM	#9
rusty1 Gone Wild Join Date: Mar 2009 Location: cochran georgia Posts: 300	Re: 48v @ wot ya scott i see your point but i like have a resister cart i use around the yard half throttle but also like to play a little 2 have you seen what he is talking about ?

04-27-2009, 06:09 PM	#10
scottyb Happy Carting Join Date: Dec 2007 Location: Southern California Posts: 73,419	Re: 48v @ wot I saw the diagram but never did try it cause it just makes sense to go to a single charger and 48v all the time.