differential input shaft

MuayThai41 · 05-26-2009, 04:57 PM

Allright guys,

I'm sure roady will call me and answer my question before too many people get to read it, but what are the options when a differential input shaft is as smooth as a babys bottom? As most of you are aware, my motor and diff have not gone through "normal" wear and tear, and it's decision making time. I have an extra rear end, but if it's something i can change just part of, keeping the spare diff in tact would be nice.

roady89 · 05-26-2009, 05:51 PM

No, they took my phone.

roady89 · 05-26-2009, 05:52 PM

Let me check with some of the sponsors...maybe they can supply a shaft.

MuayThai41 · 05-26-2009, 07:09 PM

Took your phone?!?!?! What kind of SUMBITCH would do such a thing! When you head in to cut on the table, send me some smoke signals. Did you ever find your fuel sender?

:thumbu p:

roady89 · 05-26-2009, 07:23 PM

The cheap basturds I USED to work for. (Dont tell em I said that. LOL!) What "fuel sender"..You mean Fuel pump?

MuayThai41 · 05-26-2009, 07:36 PM

:shock YES i mean fuel PUMP, my brain has been taken over by OnSite vocabulary. Getting back to the topic, is that thing press fit on, or can it be removed? I've got the rear end from hooptie i could swap out, but we did such a nice job rebuiling Gato's that I didn't want the effort to go to waste.

I think all of Gatos batts are still good, i pulled the motor, but since i no gotty no shop keys i didn'y get to harvest Whiteys motor or the controller. What did we do with the second controller?

I know what everyone else reading this is thinking..."why aren't these guys PMing this inside conversation!" Well it's Roady's website, and i plain just don't give a rats!

: ?

roady89 · 05-26-2009, 07:46 PM

There is a snap ring that holds the input shaft and bearing in. Take the snap ring out and the shaft should come right out. Same goes for BOTH rear ends. You'll probly have to clean the goop out from around the shaft area to see the snap ring.

I am trying to find an exploded diagram but I haven't found one that shows the snap ring or lists the parts. Am I gonna have to come do it for ya NYLAN!!!

I have the other controller! REMEMBER! Apparently NOT!

MuayThai41 · 05-26-2009, 09:10 PM

YOU have the other one!!! Send that $$$$ my way whenever you get a chance....

wink:: shock:

05-26-2009, 04:57 PM	#1
MuayThai41 Gone Wild Join Date: Dec 2006 Location: Irving Texas Posts: 249	differential input shaft Allright guys, I'm sure roady will call me and answer my question before too many people get to read it, but what are the options when a differential input shaft is as smooth as a babys bottom? As most of you are aware, my motor and diff have not gone through "normal" wear and tear, and it's decision making time. I have an extra rear end, but if it's something i can change just part of, keeping the spare diff in tact would be nice.

05-26-2009, 05:51 PM	#2
roady89 nimda Join Date: Jun 2007 Posts: 13,022	Re: differential input shaft No, they took my phone.
roady89 nimda Join Date: Jun 2007 Posts: 13,022

05-26-2009, 05:52 PM	#3
roady89 nimda Join Date: Jun 2007 Posts: 13,022	Re: differential input shaft Let me check with some of the sponsors...maybe they can supply a shaft.
roady89 nimda Join Date: Jun 2007 Posts: 13,022

05-26-2009, 07:09 PM	#4
MuayThai41 Gone Wild Join Date: Dec 2006 Location: Irving Texas Posts: 249	Re: differential input shaft Took your phone?!?!?! What kind of SUMBITCH would do such a thing! When you head in to cut on the table, send me some smoke signals. Did you ever find your fuel sender? :thumbu p:

05-26-2009, 07:23 PM	#5
roady89 nimda Join Date: Jun 2007 Posts: 13,022	Re: differential input shaft The cheap basturds I USED to work for. (Dont tell em I said that. LOL!) What "fuel sender"..You mean Fuel pump?
roady89 nimda Join Date: Jun 2007 Posts: 13,022

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum

05-26-2009, 07:36 PM	#6
MuayThai41 Gone Wild Join Date: Dec 2006 Location: Irving Texas Posts: 249	Re: differential input shaft :shock YES i mean fuel PUMP, my brain has been taken over by OnSite vocabulary. Getting back to the topic, is that thing press fit on, or can it be removed? I've got the rear end from hooptie i could swap out, but we did such a nice job rebuiling Gato's that I didn't want the effort to go to waste. I think all of Gatos batts are still good, i pulled the motor, but since i no gotty no shop keys i didn'y get to harvest Whiteys motor or the controller. What did we do with the second controller? I know what everyone else reading this is thinking..."why aren't these guys PMing this inside conversation!" Well it's Roady's website, and i plain just don't give a rats! : ?

05-26-2009, 07:46 PM	#7
roady89 nimda Join Date: Jun 2007 Posts: 13,022	Re: differential input shaft There is a snap ring that holds the input shaft and bearing in. Take the snap ring out and the shaft should come right out. Same goes for BOTH rear ends. You'll probly have to clean the goop out from around the shaft area to see the snap ring. I am trying to find an exploded diagram but I haven't found one that shows the snap ring or lists the parts. Am I gonna have to come do it for ya NYLAN!!! I have the other controller! REMEMBER! Apparently NOT!
roady89 nimda Join Date: Jun 2007 Posts: 13,022

05-26-2009, 09:10 PM	#8
MuayThai41 Gone Wild Join Date: Dec 2006 Location: Irving Texas Posts: 249	Re: differential input shaft YOU have the other one!!! Send that $$$$ my way whenever you get a chance.... wink:: shock:

Similar Threads
Thread	Forum
Input shaft	Electric EZGO
Input Shaft question	Electric EZGO
Transmission Input Shaft Replacement	Gas Yamaha
Input shaft seal replacement on a 2005 350cc	Gas EZGO
Spring on splined input shaft for transaxle	Electric Club Car