Updated to 4 ga. cable -QUESTION-

Larry L · 09-25-2007, 11:36 AM

On my '98 EZ-GO TXT/ Non DCS/PDS I've upgraded to 4 ga. cable and was told I needed to "REMOVE DIODE BETWEEN SMALL TERMINALS ON SOLENOID"

.
Is this correct? I'm a little gun shy when it comes to electricity

and I can't find anything in archives that sheds any light on this. Any of ya'll made this upgrade on this type system and removed this diode

?
Any help and/or advise greatly appreciated. Don't worry about insulting my intellegence or lack there of. I'M NOT ONLY PHYSICALLY CHALLENGED BUT ELECTRICALLY CHALLENGED AS WELL

!!
Thanks again,
Larry

Larry L · 09-26-2007, 08:57 PM

Welllll, moving right along

, to the next question that is. The next question for $64,000.00 is

gornoman · 09-26-2007, 09:02 PM

Larry,

If ALL you did was upgrade the cables leave the diode installed. There is no electrical reason to remove it because you increased the wire size.

Where's my check?

Larry L · 09-27-2007, 09:37 AM

Senor, yo no habla engles e no tengo dinero

.
It has a Curtis 400 amp controller and a AU 2500 high speed motor. Does that make a difference?
Muchas gracias

Lallo

pggroves · 09-27-2007, 09:41 AM

Usted no puede hablar inglés pero usted lo escribe bastante bien.
Pornoman no necesita el dinero de todos modos.

Larry L · 09-27-2007, 12:42 PM

Ooops, I forgot there were fellow Texans around here dontknow:. Sprekenzee Deutch

pggroves · 09-27-2007, 01:06 PM

Quote:

Originally Posted by Larry L

Ooops, I forgot there were fellow Texans around here dontknow:. Sprekenzee Deutch

Sprechen sie Deutsch? Ja ein kleines bisschen.

Un petit français aussi.

Não mau em português qualquer um.

你懂漢語嗎

owhay boutay igpay atinlay?

Lo siento para asaltar este hilo. (Sorry for the hijack)

Larry L · 09-27-2007, 02:47 PM

OKAY, so you're an abnormal Texan, in a good way I mean

Nice meeting you (in Japanese

)
Larry

gornoman · 09-27-2007, 08:16 PM

Quote:

Originally Posted by Larry L

Senor, yo no habla engles e no tengo dinero

.
It has a Curtis 400 amp controller and a AU 2500 high speed motor. Does that make a difference?
Muchas gracias

Lallo

Sounds like a Freedom model, but the logic still stands. Leave the diode installed. I am running an Alltrax AXE 4844 400amp and 48volts. My original solenoid is still in place since this spring when I did the 48v upgrade. The diode is still there also.

Who told you to remove it? Did they state the reason why?

Hastalaveesta! (7 years of French class down the drain!)

Larry L · 09-28-2007, 11:31 AM

Gornoman, I bought some cables from that OTHER

site for a 98' EZ-GO TXT (Non DCS/PDS). These were cables specified by them for my cart and the instructions/diagram said to "remove diode bewteen the two small posts". I wasn't sure about wheather or not I should SO, I called them and was told by a rep "yes, you're supposed to remove diode from small posts". It sounded like he was simply reading the same instructions/diagram that I and rather than giving an explanation as to why I should, he just said I should.
I was still leary and gun shy so that's when I started researching archives and asking around.
Thanks again gornoman you've been a big help

Seems to me that you have tangible proof to back your suggestion so, I'll heed your advise

.
Larry

09-25-2007, 11:36 AM	#1
Larry L Not Yet Wild Join Date: Sep 2007 Location: Texas Hill Country Posts: 32	Updated to 4 ga. cable -QUESTION- On my '98 EZ-GO TXT/ Non DCS/PDS I've upgraded to 4 ga. cable and was told I needed to "REMOVE DIODE BETWEEN SMALL TERMINALS ON SOLENOID". Is this correct? I'm a little gun shy when it comes to electricity and I can't find anything in archives that sheds any light on this. Any of ya'll made this upgrade on this type system and removed this diode? Any help and/or advise greatly appreciated. Don't worry about insulting my intellegence or lack there of. I'M NOT ONLY PHYSICALLY CHALLENGED BUT ELECTRICALLY CHALLENGED AS WELL!! Thanks again, Larry

09-26-2007, 08:57 PM	#2
Larry L Not Yet Wild Join Date: Sep 2007 Location: Texas Hill Country Posts: 32	Re: Updated to 4 ga. cable -QUESTION- Welllll, moving right along, to the next question that is. The next question for $64,000.00 is

09-26-2007, 09:02 PM	#3
gornoman Stay thirsty my friends! Join Date: Jan 2007 Location: Suburban Chicago Posts: 24,286	Re: Updated to 4 ga. cable -QUESTION- Larry, If ALL you did was upgrade the cables leave the diode installed. There is no electrical reason to remove it because you increased the wire size. Where's my check?

09-27-2007, 09:37 AM	#4
Larry L Not Yet Wild Join Date: Sep 2007 Location: Texas Hill Country Posts: 32	Re: Updated to 4 ga. cable -QUESTION- Senor, yo no habla engles e no tengo dinero. It has a Curtis 400 amp controller and a AU 2500 high speed motor. Does that make a difference? Muchas gracias Lallo

09-27-2007, 09:41 AM	#5
pggroves steeplejack x Join Date: Jan 2007 Location: Republic of Texas Posts: 3,382	Re: Updated to 4 ga. cable -QUESTION- Usted no puede hablar inglés pero usted lo escribe bastante bien. Pornoman no necesita el dinero de todos modos.

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum

09-27-2007, 12:42 PM	#6
Larry L Not Yet Wild Join Date: Sep 2007 Location: Texas Hill Country Posts: 32	Re: Updated to 4 ga. cable -QUESTION- Ooops, I forgot there were fellow Texans around here dontknow:. Sprekenzee Deutch

09-27-2007, 02:47 PM	#8
Larry L Not Yet Wild Join Date: Sep 2007 Location: Texas Hill Country Posts: 32	Re: Updated to 4 ga. cable -QUESTION- OKAY, so you're an abnormal Texan, in a good way I mean Nice meeting you (in Japanese) Larry

09-28-2007, 11:31 AM	#10
Larry L Not Yet Wild Join Date: Sep 2007 Location: Texas Hill Country Posts: 32	Re: Updated to 4 ga. cable -QUESTION- Gornoman, I bought some cables from that OTHER site for a 98' EZ-GO TXT (Non DCS/PDS). These were cables specified by them for my cart and the instructions/diagram said to "remove diode bewteen the two small posts". I wasn't sure about wheather or not I should SO, I called them and was told by a rep "yes, you're supposed to remove diode from small posts". It sounded like he was simply reading the same instructions/diagram that I and rather than giving an explanation as to why I should, he just said I should. I was still leary and gun shy so that's when I started researching archives and asking around. Thanks again gornoman you've been a big help Seems to me that you have tangible proof to back your suggestion so, I'll heed your advise. Larry

Similar Threads
Thread	Forum
New Updated Pic's	On Road Golf Carts!
Updated Video Section	Videos
Roady89's Battery Cable Review	Garage and Workshop
Updated Pic's 80 EZGO	Gas EZGO
choke cable	Gas Yamaha