|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
07-09-2009, 08:43 PM | #1 |
Not Yet Wild
Join Date: Jul 2009
Posts: 16
|
12 volt lights for TXT
Im installing lights on my 36V ezgo. For 12 volt lights where do I tie in to the batterys to get the 12v? They are all tied together to get the 36v. HELP
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
07-09-2009, 09:51 PM | #2 |
Not Yet Wild
Join Date: Jun 2009
Location: San Antonio Tx
Posts: 11
|
Re: 12 volt lights for TXT
Just on 2 different batteries [put + to one & - to the other that gives you 12v
|
07-09-2009, 09:52 PM | #3 |
E-Z-FUN
Join Date: May 2009
Location: Oxford, FL
Posts: 383
|
Re: 12 volt lights for TXT
Let's see if I can help!
Out of two batteries, take the pos.(+) from one and the neg.(-) from the other. That would be two times 6v. for 12v. |
07-09-2009, 10:51 PM | #4 |
steeplejack x
Join Date: Jan 2007
Location: Republic of Texas
Posts: 3,382
|
Re: 12 volt lights for TXT
Always best practice (and safest) to confirm voltage with a meter before connecting a load.
A meter will also show you the different voltages that can be obtained from six 6v batteries wired in series. Good luck. |
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
4-12 volt Battery Pack Run Times compared to 6 8 volt | Electric Club Car | |||
12 volt ground for lights | Electric EZGO | |||
Lights with Volt reducer wiring quest. | Electric Club Car | |||
36 Volt EZ-Go, boost of power, put a 12-Volt car battery in it? | Electric EZGO | |||
want to add lights and marker lights | Electric Club Car |