|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
07-22-2009, 05:00 AM | #1 |
Not Yet Wild
Join Date: Oct 2008
Posts: 8
|
01 EZGO PDS Does not go
My 01 PDS cart just quit the other day. It was working just fine and went to back out of the driveway and put it in forward and nothing!!! It will not go either direction, batteries are fully charged and only 2 years old, when I put in reverse buzzer works, battery gauge shows full charge. I did the check by flipping switch back and forth between reverse and neutral 5 times and only get the 4 beeps for freedom chip, nothing else??? It seem to want to go for a split second after I do the test but just barly jerks before quiting. ANY IDEAS or Logical places to check???? I am new to EZGO's and do not have a clue as to where to start. Thanks in advance for any help
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
07-22-2009, 03:51 PM | #2 |
Not Yet Wild
Join Date: Oct 2008
Posts: 8
|
Re: 01 EZGO PDS Does not go
please anyone have a clue??
|
07-22-2009, 03:57 PM | #3 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,419
|
Re: 01 EZGO PDS Does not go
When you push on the gas you should hear faint click under the floor indicating the microswitch is working and then a louder click in the pasenger side of the battery compartment indicating the solenoid is working?
|
07-22-2009, 03:58 PM | #4 |
48/400/Alltrax HS motor
Join Date: Jan 2007
Location: Liberty SC, Garden City SC
Posts: 6,190
|
Re: 01 EZGO PDS Does not go
Start by checking all the cables. All of them. if it's not going in to dignostic mod it maybe the controller itself. Also check the T/R connector if it's come loose then the cart want run.
|
07-22-2009, 05:30 PM | #5 |
Not Yet Wild
Join Date: Oct 2008
Posts: 8
|
Re: 01 EZGO PDS Does not go
I have had cover off of the compartment under floor mat and the micro switch does click. I can also here a faint click of what I believe to be the solenoid, but it does not go (it will flinch but then nothing). All the cables and connections are good as I redid them all. Any other ideas?? Thanks for the imput so far, I'm puzzled and don't know where to look next.
|