|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
09-30-2009, 01:47 PM | #1 |
Not Yet Wild
Join Date: Sep 2009
Posts: 27
|
Using cart to pull finishing mower?
Has anyone used a 36v ezgo to pull a finishing mower? Just curious.
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
09-30-2009, 02:26 PM | #2 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,358
|
Re: Using cart to pull finishing mower?
IS it a resistor cart or a solid state speed control.... not reccommended for a resistor cart....
|
09-30-2009, 02:31 PM | #3 |
Not Yet Wild
Join Date: Sep 2009
Posts: 27
|
Re: Using cart to pull finishing mower?
Man I am ignorant and new to the cart world. I don't know what the difference. I have a 2003 Ezgo 36V TXT, that's all I know. How do I find out?
|
09-30-2009, 03:16 PM | #4 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,358
|
Re: Using cart to pull finishing mower?
An '03 is either a series or PDS speed control cart...... either will pull it just be careful not to run the pack down too low while pulling. Realize that this is not what the cart was built for .....Always start with a full charge...... On flat ground it would say about 30-45 minutes of pulling then I would check the pack with a voltmeter and or recharge. Never run the pack down below 50% capacity... use the chart below.... My Aunts pulled a 48" flail mower for years....
|
09-30-2009, 06:21 PM | #5 |
Not Yet Wild
Join Date: Sep 2009
Posts: 27
|
Re: Using cart to pull finishing mower?
Awesome, thanks.
|
09-30-2009, 06:26 PM | #6 |
Stay thirsty my friends!
Join Date: Jan 2007
Location: Suburban Chicago
Posts: 24,283
|
Re: Using cart to pull finishing mower?
|
09-30-2009, 06:29 PM | #7 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,358
|
Re: Using cart to pull finishing mower?
|
09-30-2009, 06:33 PM | #8 |
Not Yet Wild
Join Date: Sep 2009
Posts: 27
|
Re: Using cart to pull finishing mower?
A finishing mower is similiar to a bush hog but cuts closer like a regular mower. There are pto driven models for tractors and self powered units with pull hitchs.
|
09-30-2009, 06:35 PM | #9 |
Stay thirsty my friends!
Join Date: Jan 2007
Location: Suburban Chicago
Posts: 24,283
|
Re: Using cart to pull finishing mower?
The name implies special purpose. Guess it's not so special, eh?
|
09-30-2009, 06:36 PM | #10 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,358
|
Re: Using cart to pull finishing mower?
They don't have those in the burbs, huh, Gman
|
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
Install vertical bigblock using mower transaxle | Big Block Talk! | |||
Can I Pull Anything With This Cart On Level Ground Without Damage To It? | Gas EZGO |