lifted club cars - lifted ezgo
Home FAQDonate Who's Online
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric EZGO
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV.



Post New Thread  Reply
 
Thread Tools Display Modes
Old 11-01-2009, 05:24 PM   #1
soundman
Not Yet Wild
 
Join Date: Oct 2009
Posts: 11
Default non dcs ezgo FNR wiring

trying to get some help, i have looked at the wiring diagrams but have a few more questions

on an 05 nondcs cart w/ the f/r switch that is located under the knees

you have the two microswitches on the front which are fairly simple for what is activated when. the question is on the wires on the back side


what is connected in forward, and what is connected in reverse? also anyone know the amperage flowing through these lines? obvioulsy on my cart voltage would be 36v. I would pull out my meter and test but i already have the batteries disconnected in my rebuild
soundman is offline   Reply With Quote
Alt Today
BGW

Golf car forum Sponsored Links

__________________
This advertising will not be shown in this way to registered members.
Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum
   
Old 11-01-2009, 09:26 PM   #2
roady89
nimda
Club Car
 
Join Date: Jun 2007
Posts: 13,022
Default Re: non dcs ezgo FNR wiring

Best thing to do is download a manual from the stickies. It will have everything you need ane more.
roady89 is offline   Reply With Quote
Old 11-01-2009, 09:51 PM   #3
soundman
Not Yet Wild
 
Join Date: Oct 2009
Posts: 11
Default Re: non dcs ezgo FNR wiring

already been through the manual and wiring diagrams. it all explains what wires go where, but non show how the wires "B, C, & D" are in contact with "A" when in forward or reverse.
soundman is offline   Reply With Quote
Old 11-01-2009, 10:16 PM   #4
roady89
nimda
Club Car
 
Join Date: Jun 2007
Posts: 13,022
Default Re: non dcs ezgo FNR wiring

I'm not sure if I follow exactly what your trying to find out. On page 63 of the service manual 28646 it says MS2 is closed in forward and reverse and MS4 is closed only in reverse. On that page it shows what is connected in both directions.
roady89 is offline   Reply With Quote
Old 11-01-2009, 10:19 PM   #5
soundman
Not Yet Wild
 
Join Date: Oct 2009
Posts: 11
Default Re: non dcs ezgo FNR wiring

not after the micro switches, those are easy.

really after what happens with the 3 battery cables coming off of the back of the FNR unit.

what connections are made when in forward, and what connections are made when in reverse
soundman is offline   Reply With Quote
Old 11-01-2009, 10:26 PM   #6
roady89
nimda
Club Car
 
Join Date: Jun 2007
Posts: 13,022
Default Re: non dcs ezgo FNR wiring

According to page 63 of the service manual...
Foward:
A to D and B to C
Reverse:
A to B and C to D
roady89 is offline   Reply With Quote
Old 11-01-2009, 10:36 PM   #7
soundman
Not Yet Wild
 
Join Date: Oct 2009
Posts: 11
Default Re: non dcs ezgo FNR wiring

now i see it.

thx


any idea what kind of amperage runs through there on a stock cart?
soundman is offline   Reply With Quote
Reply
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric EZGO


Thread Tools
Display Modes


Similar Threads
Thread Forum
87' EZGO Wiring Gas EZGO
95 ezgo controller wiring Electric EZGO
ezgo wiring Electric EZGO
EzGo wiring help Electric EZGO
wiring help on ezgo Electric EZGO


All times are GMT -5. The time now is 03:02 PM.


Club Car Electric | EZGO Electric | Lifted Golf Carts | Gas EZGO | Used Golf Carts and Parts

Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
This Website and forum is the property of Buggiesgonewild.com. No material may be taken or duplicated in part or full without prior written consent of the owners of buggiesgonewild.com. © 2006-2017 Buggiesgonewild.com. All rights reserved.