Got new controller, NEED HELP

linefuse29 · 11-04-2009, 05:52 PM

Got my Alltrax Axe 4844. The plastic plug on my old controller is too smalll for the alltrax. Its a 4 pin but the prongs are too big on the Alltrax. Where can I get another plug and what do I call it.

gornoman · 11-04-2009, 05:58 PM

Stand by, I have a pic to find.....

gornoman · 11-04-2009, 06:03 PM

The plug gets cut off (I left 4 inches of wire on it just in case I had to splice it back in one day) and each wire gets an insulated spade connector crimped on. Disregard the colors of my control wires, they are not factory issue.

linefuse29 · 11-04-2009, 06:07 PM

What size are the spade connectors?? And the color of the wires on teh spade connectors, are they correct? example Brown to 1/2 speed....

gornoman · 11-04-2009, 06:16 PM

I don't know the size, I just used the size that fits. They were all in my wiring kit, and are pretty common. Maybe 1/4"?

Wire color doesnt matter, the important part is getting the correct wire to the correct post. The Alltrax instructions should be very specific.

linefuse29 · 11-04-2009, 06:26 PM

The alltrax instructions I have are not that specific. I have a curits 1206 on teh cart now. I guess I can look up its diagram.

linefuse29 · 11-04-2009, 06:27 PM

It looks like you have resistors across the coils of your solenoid?? Where did you get them??

mikesmotortoys · 11-04-2009, 08:25 PM

Where did you get the controller?

roady89 · 11-04-2009, 08:29 PM

The spade terminals are just regular everyday spade terminals. Just be sure and use the right gauge spade and crimp well.

Black and white wires are your 2 throttle wires.

gornoman · 11-04-2009, 08:56 PM

Quote:

Originally Posted by linefuse29

It looks like you have resistors across the coils of your solenoid?? Where did you get them??

There is a resistor across the large solenoid posts and a diode across the small solenoid posts. I purchased them from a local electronics supply vendor. You can reuse the ones on your existing solenoid unless you go to 48v, then you should get different ones with new values.

11-04-2009, 05:52 PM	#1
linefuse29 Not Yet Wild Join Date: Oct 2009 Posts: 52	Got new controller, NEED HELP Got my Alltrax Axe 4844. The plastic plug on my old controller is too smalll for the alltrax. Its a 4 pin but the prongs are too big on the Alltrax. Where can I get another plug and what do I call it.
linefuse29 Not Yet Wild Join Date: Oct 2009 Posts: 52

11-04-2009, 05:58 PM	#2
gornoman Stay thirsty my friends! Join Date: Jan 2007 Location: Suburban Chicago Posts: 24,292	Re: Got new controller, NEED HELP Stand by, I have a pic to find.....

11-04-2009, 06:03 PM	#3
gornoman Stay thirsty my friends! Join Date: Jan 2007 Location: Suburban Chicago Posts: 24,292	Re: Got new controller, NEED HELP The plug gets cut off (I left 4 inches of wire on it just in case I had to splice it back in one day) and each wire gets an insulated spade connector crimped on. Disregard the colors of my control wires, they are not factory issue.

11-04-2009, 06:07 PM	#4
linefuse29 Not Yet Wild Join Date: Oct 2009 Posts: 52	Re: Got new controller, NEED HELP What size are the spade connectors?? And the color of the wires on teh spade connectors, are they correct? example Brown to 1/2 speed....
linefuse29 Not Yet Wild Join Date: Oct 2009 Posts: 52

11-04-2009, 06:16 PM	#5
gornoman Stay thirsty my friends! Join Date: Jan 2007 Location: Suburban Chicago Posts: 24,292	Re: Got new controller, NEED HELP I don't know the size, I just used the size that fits. They were all in my wiring kit, and are pretty common. Maybe 1/4"? Wire color doesnt matter, the important part is getting the correct wire to the correct post. The Alltrax instructions should be very specific.

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum

11-04-2009, 06:26 PM	#6
linefuse29 Not Yet Wild Join Date: Oct 2009 Posts: 52	Re: Got new controller, NEED HELP The alltrax instructions I have are not that specific. I have a curits 1206 on teh cart now. I guess I can look up its diagram.
linefuse29 Not Yet Wild Join Date: Oct 2009 Posts: 52

11-04-2009, 06:27 PM	#7
linefuse29 Not Yet Wild Join Date: Oct 2009 Posts: 52	Re: Got new controller, NEED HELP It looks like you have resistors across the coils of your solenoid?? Where did you get them??
linefuse29 Not Yet Wild Join Date: Oct 2009 Posts: 52

11-04-2009, 08:25 PM	#8
mikesmotortoys Gone Wild Join Date: Mar 2008 Location: Rockwall, Texas (Dallas / Ft. Worth) Posts: 7,077	Re: Got new controller, NEED HELP Where did you get the controller?
	www.MIKESMOTORTOYS.com www.EZGOPARTSONLINE.com Factory EZGO - Bad Boy Buggy - Dixie Chopper Mowers

11-04-2009, 08:29 PM	#9
roady89 nimda Join Date: Jun 2007 Posts: 13,022	Re: Got new controller, NEED HELP The spade terminals are just regular everyday spade terminals. Just be sure and use the right gauge spade and crimp well. Black and white wires are your 2 throttle wires.
roady89 nimda Join Date: Jun 2007 Posts: 13,022

Similar Threads
Thread	Forum
a DC motor controller ( electronic speed controller)	Golf Carts and Parts
controller	Electric EZGO
Did lift kit cause controller to die? What are controller options? 95 EZGO 25864G05	Electric EZGO
Controller help	Extreme DC!
controller getting hot	Electric EZGO