1994 Medalist with a need for speed

PostalGuy · 12-01-2007, 02:22 PM

Hello everyone. New to the forum with an old cart that badly needs speed (motor worn out). Need advise on what to do with my 94. Its 36V stock everything. I want to leave it a 36V but upgrade on the motor, controller, wiring, etc. Don't really want to buy newer. What would be my best combo for getting 20mph (+). Primarily play on level course. I have about $2K.

roady89 · 12-01-2007, 02:52 PM

400+amp Alltrax controller +/-$500
4 gauge cables -$100
EMP 2 speed golf cart motor so you can have speed AND torque. -$400 ish including shipping to and from.
H/D solenoid -$100

For a grand total of $1100

If and when you decide to upgrade to 48 volts you will be ready to rock and roll with the excetion of maybe a 48 volt solenoid. The 36 volt solenoid will work but how long is the question.

You could also swap the medalist boidy for a newer TXT body.

pggroves · 12-02-2007, 11:14 AM

Quote:

Originally Posted by roady89

....If and when you decide to upgrade to 48 volts you will be ready to rock and roll with the excetion of maybe a 48 volt solenoid.....

let's not forget a 48v charger....

rdnktrkr · 12-02-2007, 06:54 PM

When I bought mine the batteries were bad and no charger so I went straight to 48, I've had a few people drive it and all like the 48v system. If I bought another one I think my first upgrade would be to 48v. I don't know my speed but it will pull strong and go fast enough for the steering and brakes. Good luck Greg

12-01-2007, 02:22 PM	#1
PostalGuy Not Yet Wild Join Date: Dec 2007 Posts: 1	1994 Medalist with a need for speed Hello everyone. New to the forum with an old cart that badly needs speed (motor worn out). Need advise on what to do with my 94. Its 36V stock everything. I want to leave it a 36V but upgrade on the motor, controller, wiring, etc. Don't really want to buy newer. What would be my best combo for getting 20mph (+). Primarily play on level course. I have about $2K.
PostalGuy Not Yet Wild Join Date: Dec 2007 Posts: 1

12-01-2007, 02:52 PM	#2
roady89 Brkn it dwn BaRnEy StYlE Join Date: Jun 2007 Location: Kaufman, Texas Posts: 3,414	Re: 1994 Medalist with a need for speed 400+amp Alltrax controller +/-$500 4 gauge cables -$100 EMP 2 speed golf cart motor so you can have speed AND torque. -$400 ish including shipping to and from. H/D solenoid -$100 For a grand total of $1100 If and when you decide to upgrade to 48 volts you will be ready to rock and roll with the excetion of maybe a 48 volt solenoid. The 36 volt solenoid will work but how long is the question. You could also swap the medalist boidy for a newer TXT body.
	Golf Carts \| Lifted Golf Carts \| Electric Golf Carts Custom EZGO \| B&S V-Twin \| All Sports Long Travel Lift \| 8:1 Gears \| 22" Titan AT489's \| \| \| \| \| \| \|

12-02-2007, 06:54 PM	#4
rdnktrkr Getting Wild Join Date: Sep 2007 Location: douglasville, Ga Posts: 125	Re: 1994 Medalist with a need for speed When I bought mine the batteries were bad and no charger so I went straight to 48, I've had a few people drive it and all like the 48v system. If I bought another one I think my first upgrade would be to 48v. I don't know my speed but it will pull strong and go fast enough for the steering and brakes. Good luck Greg

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Forum
1994 36V Club Car	Electric Club Car
speed spring install, need help	Gas Yamaha
G8 Speed Options	Electric Yamaha
speed ?	Electric EZGO
Gonna need more speed	Gas Yamaha