What do I have?

buscopat · 11-22-2009, 11:21 AM

So a "friend" brought me an Ez-Go in pieces and asked if I could put it back togehter.
He had it to the local golf cart shop (Club Car dealer) who was feeding him a line. The dealer said that since there was a pin broke off of the controller it was bad, don't ezgo controllers only have a pin missing on the 6 pin connector.
Anyways the numbers off of the tag are 948583 F1496.
What is it so I can find the right wiring diagram?

rib33024 · 11-22-2009, 11:31 AM

It's a 96 and there a ing wire diagram in the stickys

scottyb · 11-22-2009, 11:46 AM

You need to know if it is series or dcs ..... the F&R on dcs looks like a hockey puck on the back side and the environmental cover will have a run/tow switch on it? Wadda ya got?

mikesmotortoys · 11-22-2009, 11:47 AM

Yes - a SERIES controller has 5 pins, 4 in a row, a blank, then the fifth. To the persone not knowing what they were looking at, it would seem that a pin is missing. Why a golf cart shop would not know the difference is beyond me?

Good call on your friends part! Hopefully the controller is still good!

mikesmotortoys · 11-22-2009, 11:49 AM

A DCS controller has 9 pins. 7 in a row, a space, then the final two...

buscopat · 11-22-2009, 04:09 PM

Quote:

Originally Posted by scottyb

You need to know if it is series or dcs ..... the F&R on dcs looks like a hockey puck on the back side and the environmental cover will have a run/tow switch on it? Wadda ya got?

There is no tow/run switch

scottyb · 11-22-2009, 04:32 PM

Quote:

Originally Posted by mikesmotortoys

Yes - a SERIES controller has 5 pins, 4 in a row, a blank, then the fifth. To the persone not knowing what they were looking at, it would seem that a pin is missing. Why a golf cart shop would not know the difference is beyond me?

Good call on your friends part! Hopefully the controller is still good!

....you have a series cart.....

buscopat · 11-23-2009, 07:19 AM

So I think I have the wiring correct, but there is no power to activate the solenoid.
I jumpered the solenoid, and I have reverse only, no forward.
Any thought on the issue?

scottyb · 11-23-2009, 07:25 AM

If all of the cabling (motor - F&R) is correct, you have a bad controller.

buscopat · 11-23-2009, 08:27 AM

Thanks ScottyB

11-22-2009, 11:21 AM	#1
buscopat Gone Crazy Join Date: Dec 2008 Location: Churubusco, IN Posts: 2,161	What do I have? So a "friend" brought me an Ez-Go in pieces and asked if I could put it back togehter. He had it to the local golf cart shop (Club Car dealer) who was feeding him a line. The dealer said that since there was a pin broke off of the controller it was bad, don't ezgo controllers only have a pin missing on the 6 pin connector. Anyways the numbers off of the tag are 948583 F1496. What is it so I can find the right wiring diagram?

11-22-2009, 11:31 AM	#2
rib33024 ...................... Join Date: Apr 2009 Location: FT Lauderdale FL. Posts: 16,416	Re: What do I have? It's a 96 and there a ing wire diagram in the stickys

11-22-2009, 11:46 AM	#3
scottyb Happy Carting Join Date: Dec 2007 Location: Southern California Posts: 73,408	Re: What do I have? You need to know if it is series or dcs ..... the F&R on dcs looks like a hockey puck on the back side and the environmental cover will have a run/tow switch on it? Wadda ya got?

11-22-2009, 11:47 AM	#4
mikesmotortoys Gone Wild Join Date: Mar 2008 Location: Rockwall, Texas (Dallas / Ft. Worth) Posts: 7,077	Re: What do I have? Yes - a SERIES controller has 5 pins, 4 in a row, a blank, then the fifth. To the persone not knowing what they were looking at, it would seem that a pin is missing. Why a golf cart shop would not know the difference is beyond me? Good call on your friends part! Hopefully the controller is still good!
	www.MIKESMOTORTOYS.com www.EZGOPARTSONLINE.com Factory EZGO - Bad Boy Buggy - Dixie Chopper Mowers

11-22-2009, 11:49 AM	#5
mikesmotortoys Gone Wild Join Date: Mar 2008 Location: Rockwall, Texas (Dallas / Ft. Worth) Posts: 7,077	Re: What do I have? A DCS controller has 9 pins. 7 in a row, a space, then the final two...
	www.MIKESMOTORTOYS.com www.EZGOPARTSONLINE.com Factory EZGO - Bad Boy Buggy - Dixie Chopper Mowers

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum

11-23-2009, 07:19 AM	#8
buscopat Gone Crazy Join Date: Dec 2008 Location: Churubusco, IN Posts: 2,161	Re: What do I have? So I think I have the wiring correct, but there is no power to activate the solenoid. I jumpered the solenoid, and I have reverse only, no forward. Any thought on the issue?

11-23-2009, 07:25 AM	#9
scottyb Happy Carting Join Date: Dec 2007 Location: Southern California Posts: 73,408	Re: What do I have? If all of the cabling (motor - F&R) is correct, you have a bad controller.

11-23-2009, 08:27 AM	#10
buscopat Gone Crazy Join Date: Dec 2008 Location: Churubusco, IN Posts: 2,161	Re: What do I have? Thanks ScottyB