![]() |
|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
![]() ![]() |
Thread Tools | Display Modes |
![]() | #1 |
Not Yet Wild Join Date: Feb 2010
Posts: 32
| ![]() I was wondering if anyone has had a golf cart dipped and how much it cost I was gonna wrap it but everyone keeps elling me it's a pain in the well you ![]() |
![]() | ![]() |
![]() | |
![]() __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum | |
![]() | #2 |
Not Yet Wild ![]() Join Date: Feb 2010 Location: Arkansas
Posts: 51
| ![]() Its takes two 4x5 sheets to wrap an EZGO. Or 40sq foot. It is a pain in the rear. But, the dipped body parts will scratch and come off a lot faster. Most of the manufacturers have a 5 year warranty on the vinyl. If you have a business close to you that does vinyl, that is your best bet. They will prime everything, aswell as warranty to work. I have done a few of these over the years. Also, you can have it clear coated and it will last the life of the cart. Hope this helps and GOOD LUCK! |
![]() | ![]() |
![]() | #3 | |
Not Yet Wild ![]() Join Date: Jul 2009 Location: Summertown, TN
Posts: 49
| ![]() Quote:
![]() ![]() | |
![]() | ![]() |
![]() | #4 |
Not Yet Wild ![]() Join Date: Feb 2010 Location: Arkansas
Posts: 51
| ![]() Painting it with a good quality paint is a good idea too. If you scratch it, you can always have a quick and easy fix! Nice work. |
![]() | ![]() |
![]() | #5 |
Gone Wild ![]() Join Date: Sep 2009
Posts: 308
| ![]() |
![]() | ![]() |
![]() | #6 |
Gone Wild ![]() Join Date: Jan 2010 Location: Wren, MS
Posts: 203
| ![]() |
![]() | ![]() |
![]() | #7 | |
Not Yet Wild ![]() Join Date: Jul 2009 Location: Summertown, TN
Posts: 49
| ![]() Quote:
More pix | |
![]() | ![]() |
![]() | #8 |
Not Yet Wild ![]() Join Date: Jul 2009 Location: Summertown, TN
Posts: 49
| ![]() and by the by I am NOT the artistic type. It was that easy! |
![]() | ![]() |
![]() | #9 |
Gone Wild ![]() Join Date: Sep 2009
Posts: 308
| ![]() I found a svg file of some camo i was going to use my wifes Circuit and see if i could make my own stencil but im not sure if i can get layers out of the svg file. What kind of paint was it just camo colored or actual "camo" paint? |
![]() | ![]() |
![]() | #10 | |
Not Yet Wild ![]() Join Date: Jul 2009 Location: Summertown, TN
Posts: 49
| ![]() Quote:
I thought about clear coating but it would shine too much in the woods. And yes, if it gets scratched, whip out the stencil and add a little paint! | |
![]() | ![]() |
![]() |
|
Thread Tools | |
Display Modes | |
|
![]() | ||||
Thread | Forum | |||
camo dipped bodies | Electric EZGO | |||
Camo Wrap | Lifted Golf Carts | |||
camo wraps | Lifted Golf Carts | |||
camo? | Design Center | |||
camo tape | Gas Club Car |